Microcontroller Chip

Approx. Rs 150 / PieceGet Latest Price

Product BrochureProduct Details:

he GT10J303 is a silicon N-channel Insulated Gate Bipolar Transistor (IGBT) designed for high-power switching and motor control applications.anufactured by Toshiba, it is typically housed in a TO-220 package.citeturn0search3 Key Specifications:

• Collector-Emitter Voltage (VCES): 00 V- Continuous Collector Current (IC): 0 A- Saturation Voltage (VCE(sat)): .7 V (max) at IC = 10 A- Turn-off Time (tf): .30 µs (max) at IC = 10 A- Diode Forward Voltage (VF): .5 V (typ)- Total Power Dissipation (PD): 5 W- Operating Junction Temperature (Tj): 40°C to 150°C he GT10J303 features a fast recovery diode (FRD) integrated between the emitter and collector, enhancing its performance in motor control applications.ts low saturation voltage and high-speed switching capabilities make it suitable for various high-power applications.citeturn0search3 For detailed technical information, you can refer to the datasheet available at: citeturn0search3

Approx. Rs 400 / PieceGet Latest Price

Product BrochureProduct Details:

The SMA5118 is a switching regulator IC manufactured by Sanken Electric. Here are its key details:

Key Specifications:

• Type: Switching Regulator IC
• Input Voltage: Typically designed for AC-DC or DC-DC power conversion applications
• Output: Integrated switching regulator with built-in MOSFET
• Package: Likely SIL (Single In-Line) package, which is common for power ICs
• Manufacturer: Sanken Electric

Features:

• High-efficiency switching regulator
• Integrated MOSFET for reduced external component count
• Designed for power supply applications
• Robust design with built-in protections

Applications:

• Power supply units (SMPS)
• Industrial power regulation
• Consumer electronics requiring efficient DC-DC conversion

Would you like a datasheet or help with sourcing this IC?

Approx. Rs 2,500 / PieceGet Latest Price

Product BrochureProduct Details:

The STC04IE170HV is a monolithic emitter switched bipolar transistor (ESBT) developed by STMicroelectronics. It features a high voltage rating of 1700 V, a collector current of 4 A, and an on-resistance of 0.17 Ω. This device is designed for high-frequency, high-voltage applications, such as auxiliary switched-mode power supplies (SMPS) for three-phase mains. citeturn0search0

Key Features:

• High voltage/high current cascode configuration

• Low equivalent on-resistance

• Very fast switching capabilities, up to 150 kHz

• Squared RBSOA (Reverse Bias Safe Operating Area) up to 1700 V

• Very low input capacitance (CISS) when driven by a 47 Ω gate resistor

• Minimal turn-off crossover time

The STC04IE170HV is housed in a TO-247-4L HV package, facilitating through-hole mounting. citeturn0search0

Regarding the part number CD04IE170HV, there doesn't appear to be information available from the provided sources. It's possible that this could be a typographical error or a misreading of the STC04IE170HV part number.

For detailed specifications and application guidelines, please refer to the STC04IE170HV datasheet.

Approx. Rs 250 / PieceGet Latest Price

Product BrochureProduct Details:

The TJA1051/3 is a high-speed CAN transceiver from NXP Semiconductors, designed for Controller Area Network (CAN) bus applications.

Key Specifications:

• Type: High-Speed CAN Transceiver

• Package: SOIC-8 (SMD)

• Supply Voltage: 4.5V to 5.5V

• Data Rate: Up to 1 Mbps

• ESD Protection: ±6 kV (HBM)

• Bus Fault Protection: -27V to +40V

• Low Electromagnetic Emission (EME)

• Standby Mode for Low Power Consumption

Variants:

• TJA1051T/3 → Standard Version

• TJA1051TK/3 → With Standby Mode

Applications:

• Automotive CAN networks

• Industrial automation

• Communication between microcontrollers in embedded systems

Would you like a datasheet or help with a circuit design using this transceiver?

Approx. Rs 200 / PieceGet Latest Price

Product BrochureProduct Details:

The TPC6108 is a P-Channel MOSFET produced by Toshiba Semiconductor. It's designed for applications requiring efficient switching and amplification, such as in notebook PCs and portable equipment.

🔑 Key Features:

• Drain-Source Voltage (VDS):-30 

• Continuous Drain Current (ID):4.5 

• Drain-Source On-State Resistance (RDS(on)):60 m

• Gate-Source Voltage (VGS):±20 

• Power Dissipation:2.2 

• Package Type:SOT-23-

• Mounting:Surface Moun

• Operating Temperature Range:-55°C to 150°

🛠️ Applications:

Notebook PC Applicatios Portable Equipmet For detailed specifications and electrical characteristics, please refer to the [TPC6108 datasheet]

Approx. Rs 450 / PieceGet Latest Price

Product BrochureProduct Details:

The MIC4576 WT is an integrated circuit (IC) from Micrel Semiconductor, which is now part of Microchip Technology. It is a high-efficiency step-up DC-DC converter (also known as a boost converter), specifically designed for applications that require converting a lower input voltage to a higher output voltage.

Key Features of the MIC4576 WT:

1. Boost Converter (Step-Up DC-DC Converter):

   • The MIC4576 WT is primarily a step-up DC-DC converter used to increase a lower DC voltage to a higher, regulated output voltage. This is useful in a variety of applications where the input voltage from a battery or power source is lower than what the system needs to function.

2. Output Voltage Range:

   • The IC typically supports a wide output voltage range, which is usually adjustable by using external resistors. It can convert an input voltage to a fixed or variable output voltage, often in the range of 2V to 15V depending on the specific application and component values.

3. High Efficiency:

   • The MIC4576 is designed for high efficiency, typically reaching up to 90% or higher, depending on the load conditions and operating voltages. This makes it suitable for energy-efficient power conversion in battery-powered applications, reducing wasted energy and extending battery life.

4. Output Current Capability:

   • The IC is capable of providing a moderate output current, often in the range of 500mA to 1A. The exact current capacity depends on the input and output voltage settings and the external components (such as inductors and capacitors) used in the application.

5. Low Quiescent Current:

   • The MIC4576 operates with low quiescent current, which is important for power-sensitive applications like portable devices, where minimizing the current draw when the load is not active can prolong battery life

7. Adjustable Frequency:

   • The device operates at a fixed switching frequency, which is typically 300 kHz or 500 kHz, allowing for predictable performance and easier filtering. This feature is critical for noise-sensitive applications.

8. Thermal and Overcurrent Protection:

   • The MIC4576 is designed with built-in thermal shutdown and overcurrent protection to prevent damage under excessive heat or current conditions. This ensures reliable operation even in challenging environments.

9. Package Type:

   • The MIC4576 WT typically comes in a TSSOP-8 (Thin Shrink Small Outline Package) or similar SMD package, making it suitable for compact designs and automated assembly.

Applications:

• Battery-Powered Devices: Perfect for portable applications like handheld electronics, where the input voltage (from batteries) is lower than the required operating voltage.
• Portable LED Drivers: Used to drive LEDs that require higher voltage than the battery or power supply can provide.
• .

Summary:

The MIC4576 WT from Micrel (now part of Microchip Technology) is a high-efficiency boost converter IC designed to step up low DC input voltages to higher output voltages. With its internal switch, high efficiency, adjustable output, and built-in protection features, it is ideal for use in portable devices, battery-powered electronics, LED drivers, and power management applications that require a compact, reliable, and energy-efficient solution.

Let me know if you need more specific technical details or the datasheet for the MIC4576 WT!

Approx. Rs 800 / PieceGet Latest Price

Product BrochureProduct Details:

The MSP430G2453 is a microcontroller (MCU) from Texas Instruments, part of the MSP430 family, which is known for its ultra-low power consumption and versatile features. Below are the key specifications and details about this IC:

Key Specifications:

• Core: MSP430 16-bit RISC architecture
• Operating Voltage: 1.8V to 3.6V
• Flash Memory: 16 KB of flash memory for program storage
• RAM: 512 bytes of RAM
• Package: Available in BGA (Ball Grid Array) packaging, which provides a compact and robust form factor suitable for space-constrained designs.
• I/O Pins: Up to 24 GPIO pins (General Purpose Input/Output pins), depending on the package.
• Clock Speed: Up to 16 MHz, which allows for efficient processing while maintaining low power consumption.
• Low Power Modes: The MSP430 family is renowned for its low-power modes, making it ideal for battery-operated applications. It has multiple low-power modes, including a standby mode and active mode with dynamic voltage scaling.

Features:

• Ultra-Low Power Consumption: Designed specifically for ultra-low-power applications, making it ideal for battery-powered devices.
• Peripherals: Integrated peripherals include timers, ADC (Analog-to-Digital Converter), serial communication interfaces like USI (Universal Serial Interface) and SPI, I2C, and UART.
• Watchdog Timer: It features an integrated watchdog timer for improved system reliability, especially in embedded applications.
• Low Power Consumption in Active Mode: It offers very low current consumption in active mode, which is ideal for applications requiring long battery life.
• On-Chip Oscillator: Includes an integrated low-frequency oscillator, reducing the need for external components.
• GPIO: Versatile general-purpose I/O pins that can be configured for a wide range of functions, including interrupt handling, analog signals, and digital control.

Applications:

The MSP430G2453 is used in a variety of low-power, embedded applications, including:

• Portable Battery-Powered Devices: Ideal for applications where low power consumption is critical, such as in medical devices, remote sensors, and wearable devices.
• Consumer Electronics: For products that require efficient control and communication with minimal power usage.
• Industrial Applications: Used in low-power control systems, sensors, and monitoring devices.
• IoT (Internet of Things): Perfect for Internet of Things applications where energy efficiency is a priority, such as in remote sensors, connected devices, and smart home solutions.
• Automotive: Can be used in automotive embedded systems requiring low power and reliability.

Key Features:

• Low Power Modes: Provides multiple low-power modes for optimizing energy consumption in battery-operated devices.
• Precision ADC: Integrated 12-bit ADC, enabling precise analog-to-digital conversions for sensor and signal processing applications.
• Flexible Clocking System: The MSP430G2453 has a flexible clocking system that can be adjusted to meet specific power and performance requirements.
• Highly Integrated: Contains multiple integrated peripherals and memory, making it suitable for a wide range of embedded applications with minimal external components.

The MSP430G2453 microcontroller is especially well-suited for applications where low power consumption, versatility, and small footprint are crucial, including IoT, sensor networks, and portable embedded systems.

Approx. Rs 150 / PieceGet Latest Price

Product BrochureProduct Details:

The TLP358H is a photocoupler (optocoupler) from Toshiba, designed for high-speed switching applications. Here are the key details:

Specifications:

• Function: Photocoupler (Photo MOSFET driver)
• Isolation Voltage: 5,000Vrms (between input and output)
• Input Voltage (LED side): 1.14V to 1.26V (forward voltage)
• Supply Voltage (Vcc): 10V to 30V
• Output Current: 2.5A (max)
• Propagation Delay: 0.8µs (typical)
• Rise/Fall Time: 0.3µs/0.2µs (typical)
• Package Type: DIP-8
• Operating Temperature Range: -40°C to +125°C

Key Features:

• High isolation voltage (5kVrms), ideal for industrial applications
• High output current (2.5A) for driving power MOSFETs and IGBTs
• Fast switching speed
• Low power consumption
• Stable performance over a wide temperature range

Applications:

• Isolated gate driving for MOSFETs and IGBTs
• Switching power supplies
• Motor control
• Inverter circuits
• Industrial control systems

Would you like a datasheet or a comparison with another optocoupler?

Approx. Rs 1,500 / PieceGet Latest Price

Product BrochureProduct Details:

The CY7C68013A-100AXC is a USB microcontroller from Cypress Semiconductor, now part of Infineon Technologies. It is part of the EZ-USB FX2LP family of microcontrollers, which are designed for high-performance, low-power USB applications.

Key Features of the CY7C68013A-100AXC:

• Type: USB 2.0 Microcontroller (with 8051-based core)
• Package Type: LQFP-48 (Low-profile Quad Flat Package with 48 pins)
• Core: 8051-based microcontroller, capable of executing instructions at 100 MHz.
• USB Interface: Fully compliant with USB 2.0 Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) standards. It also supports High-Speed (480 Mbps) USB when configured with additional external circuitry.
• RAM: On-chip 256 bytes of RAM for storing temporary data during operation.
• ROM: 8 KB of ROM for firmware storage.
• I/O Pins: A variety of General-Purpose I/O (GPIO) pins, which can be configured for different peripheral functions.
• USB Endpoint: Supports up to 8 endpoints for data communication, making it suitable for high-throughput USB applications.
• Data Transfer: Capable of transferring data between the USB host and peripherals with low latency and high throughput using direct memory access (DMA).
• Integrated DMA: The microcontroller features direct memory access (DMA) for high-speed data transfer, reducing CPU load and increasing data throughput.
• Clock Speed: The CY7C68013A operates at a clock speed of 48 MHz (maximum), providing sufficient performance for various USB tasks.
• Configurable I/O: Supports flexible I/O configuration, allowing users to tailor the microcontroller to their specific needs (e.g., for custom USB device classes or other applications).
• Low Power Consumption: The device is d

Benefits:

1. High-Speed Data Transfer: Supports USB 2.0 full-speed communication and offers efficient data transfer with DMA, which is useful in applications like video capture, audio streaming, and other high-speed data transfers.
2. 8051 Core: With the 8051 core, developers can leverage existing knowledge of 8051 assembly and C programming, making it easier to implement software for this device.

Common Applications:

• USB Peripherals: Used in devices that require USB connectivity, such as USB-to-serial converters, USB audio interfaces, USB mass storage devices, and USB sensors.
• Embedded Systems: Ideal for embedded systems requiring USB connectivity, such as sensor hubs, data acquisition systems, and custom USB device classes.
• Consumer Electronics: Often used in consumer electronics requiring USB communication, such as MP3 players, digital cameras, and flash drives.
• Development Boards: Used in development kits and evaluation boards for testing USB-based designs.

Application Circuit:

A typical application circuit using the CY7C68013A would include the microcontroller connected to the USB port (either on a host or a device), with the GPIO pins used to interface with external peripherals. The I/O pins can be configured for various communication protocols like SPI, I2C, or used as general-purpose outputs or inputs. The DMA controller can be used to transfer data between the USB interface and on-chip memory or external memory, improving data throughput.

Would you like additional details on datasheets, application circuits, or specific use case examples for the CY7C68013A-100AXC microcontroller?