DIODE

Approx. Rs 550 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 200 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 90 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 1,200 / PieceGet Latest Price

The UCC35701N is an IC (Integrated Circuit) from Unitrode (now part of Texas Instruments). It is a current-mode control pulse-width modulation (PWM) controller designed for power supply applications, particularly in the design of DC-DC converters. The UCC35701N is widely used in buck, boost, and flyback converters to regulate output voltage efficiently while providing high stability and performance.

1. Current-Mode PWM Controller:

   • The UCC35701N utilizes current-mode control to regulate the output voltage of the power supply. This control technique improves the stability and transient response of the converter, which is essential for ensuring consistent output voltage even when the load varies.

2. Flexible Converter Applications:

   • The IC is suitable for a wide variety of DC-DC converter topologies, including buck, boost, and flyback converters, which are commonly used in applications such as power supplies, battery chargers, and voltage regulators.

3. Programmable Switching Frequency:

   • The UCC35701N allows users to set the switching frequency over a wide range of values, typically from 100 kHz to 1 MHz, giving designers flexibility in selecting the appropriate frequency for the application to optimize efficiency, size, and noise performance.

4. Low Startup Current:

   • The IC has a low startup current and can operate efficiently in low-power applications, making it suitable for battery-powered systems and applications where low standby power is critical.

5. Wide Input Voltage Range:

   • It typically supports a wide input voltage range, which can vary between 4.5V to 40V or higher depending on the design, allowing it to work with a variety of input voltages in industrial and consumer power supplies.
     
     
     
     Applications:

• DC-DC Converters: Used in a variety of DC-DC power supplies to step down or step up voltages, providing stable and efficient output for systems such as computers, telecommunications equipment, industrial electronics, and consumer devices.
• Battery Chargers: Ideal for battery charging applications, especially for Li-ion or NiMH battery packs, where controlled, efficient power conversion is necessary.
• Power Management Systems: Found in power management systems where stable and efficient voltage regulation is required, such as in automotive electronics or medical devices.
• Voltage Regulators: Used to design voltage regulators in systems where precise and stable output voltages are necessary, such as in LED drivers and embedded systems.

The UCC35701N from Unitrode (Texas Instruments) is a current-mode control PWM controller designed for use in DC-DC converters and other power supply applications. With its ability to regulate voltage efficiently, support various converter topologies, and offer flexible programming options for switching frequency, it is suitable for a wide range of applications, including battery chargers, voltage regulators, and power management systems. The DIP-8 package makes it easy to integrate into both through-hole and low-power applications.

Let me know if you need more technical specifications or the datasheet for the UCC35701N!

Approx. Rs 500 / PieceGet Latest Price

The 48LC8M16A2P is a SMD IC from Micron Technology, and it is a dynamic random-access memory (DRAM) device, specifically a Synchronous DRAM (SDRAM) module. This IC is designed for use in applications that require high-speed memory, such as computing, networking, and other systems where fast data access and large memory capacity are necessary.

1. Synchronous DRAM (SDRAM):

   • The 48LC8M16A2P is part of the SDRAM family, which means it synchronizes with the system’s clock signal, allowing for faster and more efficient memory access compared to asynchronous memory types.
   • SDRAM is widely used in systems that require high-speed data transfer like computers, network devices, and digital electronics.

2. Memory Size and Configuration:

   • This part number represents a 128MB memory configuration. It has a 16-bit data width and operates with a x8-bit organization, which means it provides 128 Megabits of data storage, organized in a way that allows efficient data access.
   • It typically has a density of 128Mb (megabits), arranged in 4M x 16-bit structure.

3. Operating Voltage:

   • The 48LC8M16A2P operates at a 3.3V power supply, a common voltage for many SDRAM modules of this generation.
   • It has low power consumption, which is beneficial in embedded systems and other energy-sensitive applications.

4. High-Speed Data Access:

   • The IC supports high-speed memory operation, typically offering clock speeds in the range of 100 MHz to 133 MHz or higher, which allows it to process data at a fast rate for applications requiring quick memory access.

5. Burst Mode:

   • Like other SDRAM devices, the 48LC8M16A2P supports burst mode, which allows for multiple data transfers in a single clock cycle, improving the throughput for operations such as reading or writing data.

6. Low Power Consumption:

   • The IC is designed with low power consumption in mind, which makes it ideal for portable devices, industrial systems, and battery-operated electronics where energy efficiency is a priority.

7. Package Type:

   • The 48LC8M16A2P comes in an SMD (Surface-Mount Device) package, making it suitable for automated assembly in compact electronics designs, where space is a premium and efficient manufacturing processes are needed.

8. Timing:

   • The memory is designed to provide fast response times, with features such as CAS latency (Column Address Strobe latency) and RAS latency (Row Address Strobe latency) that determine how quickly the device can respond to read/write commands.

• Computers and Servers: Used in PCs, workstations, and servers for high-speed memory storage.
• Embedded Systems: Ideal for embedded devices that require moderate-sized, high-speed memory for processing tasks.

The 48LC8M16A2P from Micron Technology is a 128MB Synchronous DRAM (SDRAM) device designed for high-speed data transfer applications. With its low power consumption, fast access speeds, and small form factor, it is ideal for use in computing, networking, embedded systems, and other applications that require efficient, high-performance memory.

If you'd like more detailed technical specifications or need the datasheet for the 48LC8M16A2P, feel free to ask!

Approx. Rs 450 / PieceGet Latest Price

The A7800A is a voltage regulator IC from Avago Technologies (now part of Broadcom). Specifically, it is a part of the A78xx series of voltage regulators. These are typically used for providing stable output voltages to electronic circuits.

• Type: Voltage Regulator IC
• Input Voltage Range: Typically supports input voltages in the range of 7V to 40V, depending on the specific model in the series.
• Output Voltage: This series is usually available in different output voltages, for instance, 5V, 12V, or others, depending on the specific part number.
• Current Output: The A7800 series is capable of delivering a certain amount of current, usually around 1-1.5A depending on the specific version.
• Applications: These ICs are commonly used in power supply circuits, automotive systems, and other electronic systems requiring stable voltage regulation.

If you need more detailed specifications or a specific application, feel free to ask!

Approx. Rs 550 / PieceGet Latest Price

The TEL2024 is an integrated circuit (IC) manufactured by Texas Instruments. It is a low-power, quad operational amplifier (op-amp), commonly used in signal conditioning, filtering, and amplification applications. The TEL2024 is designed to offer high-performance characteristics while maintaining low power consumption, making it suitable for battery-powered devices and other power-sensitive applications.

• Number of Amplifiers: 4 (quad op-amp)
• Supply Voltage (Vcc): Typically 3V to 36V (single supply) or ±1.5V to ±18V (dual supply)
• Input Offset Voltage: Low, typically in the range of microvolts
• Output Drive Capability: Capable of driving moderate loads directly
• Low Power Consumption: Ideal for battery-operated devices
• Bandwidth: Wide bandwidth for accurate signal processing
• Package Type: Available in multiple packages like PDIP, SOIC, etc.

• Low Input Bias Current: Suitable for high-impedance applications
• Low Offset Voltage: Ensures accurate signal amplification without significant errors
• High Common-Mode Rejection Ratio (CMRR): Ensures good performance in noisy environments
• Rail-to-Rail Output: Can drive outputs to both supply rails in single-supply configurations

• Signal Processing: Amplification of low-level signals
• Filters: Used in active filter circuits
• Voltage Followers: Buffer applications to provide high input impedance and low output impedance
• Sensors: Conditioning of sensor signals for further processing

If you need more details or want to know about specific use cases or circuits, feel free to ask!

Approx. Rs 250 / PieceGet Latest Price

The TPA6211A1 is a high-performance audio power amplifier IC from Texas Instruments. It is designed for driving small speakers and headphones, making it ideal for compact audio applications.

1. Audio Amplifier:

   • Delivers up to 3.1W output power into an 8Ω load at 5V supply.
   • Operates in Class-AB mode for high-quality audio output.

2. Low Distortion and Noise:

   • Provides clear and high-fidelity audio with low Total Harmonic Distortion + Noise (THD+N).

3. Efficiency:

   • High efficiency with low quiescent current, suitable for battery-powered devices.

4. Built-In Features:

   • Thermal Protection: Ensures safe operation under high temperatures.
   • Short-Circuit Protection: Protects against accidental output shorts.
   • Depop Circuitry: Reduces speaker pop and noise during power-on and power-off transitions.

5. Wide Supply Voltage Range:

   • Operates between 2.5V and 5.5V, making it compatible with a variety of power supplies.

6. Shutdown Mode:

   • Low-power shutdown mode reduces current consumption to less than 1μA.

7. Package:

   • Available in a compact SOP-8 (Small Outline Package) or MSOP-8 (Mini Small Outline Package), optimized for SMD assembly.

• Portable speakers
• Mobile phones
• Tablets and handheld devices
• LCD monitors and TVs
• Toys and gaming systems

• Compact size for space-constrained designs
• High output power for small audio systems
• Integrated protection features for reliable operation

If you need the pinout, design guidelines, or a detailed datasheet for the TPA6211A1, let me know!

Approx. Rs 650 / PieceGet Latest Price

The ADuM1100AR is a digital isolator from Analog Devices, designed to provide electrical isolation between its input and output through iCoupler® technology. This single-channel isolator supports data rates up to 25 Mbps and offers an isolation voltage of 2,500 Vrms. It is housed in an 8-lead SOIC package, making it suitable for surface-mount applications. citeturn0search3

Regarding the AD1100AR, there appears to be limited information available. It's possible that this part number is an alternative designation or a marking code for the ADuM1100AR. Some sources suggest that the AD1100AR is associated with the ADuM1100 series, citeturn0search16 but specific details are scarce.

For comprehensive specifications and application guidance, please refer to the 

Approx. Rs 400 / PieceGet Latest Price

The UCC28019A is an 8-pin active Power Factor Correction (PFC) controller from Texas Instruments, designed for boost topology operating in Continuous Conduction Mode (CCM). It's suitable for systems ranging from 100 W to over 2 kW, accommodating a wide-range universal AC input. citeturn0search2

Key Features:

• Fixed Operating Frequency: 65 kHz
• Maximum Duty Cycle: 98% (typical)
• Protection Features: Includes output overvoltage/undervoltage protection, input brown-out protection, cycle-by-cycle peak current limiting, and open-loop detection.
• Low Standby Power: User-controlled standby mode reduces power consumption.

For detailed electrical characteristics and application guidelines, refer to the UCC28019A datasheet.

If you're looking to purchase the UCC28019A in India, it's available through various distributors. For instance, Mouser Electronics offers this component. Please note that availability and pricing may vary based on your location and the distributor.

For evaluation purposes, Texas Instruments provides the UCC28019AEVM, a 350-W PFC converter evaluation module. This module showcases the features of the UCC28019A and can be a valuable resource during the design phase.

Approx. Rs 250 / PieceGet Latest Price

The SG2525 from STMicroelectronics is a PWM controller designed for switching power supplies. Here are its key specifications:

• Input Voltage: 8V to 35V

• Output: Dual push-pull or single-ended configurations

• Oscillator Frequency: Adjustable up to 400 kHz

• Dead Time Control: Built-in adjustable dead time

• Soft Start: Programmable for controlled startup

• Undervoltage Lockout (UVLO): Ensures proper startup conditions

• Error Amplifier: High-gain, internally compensated

• Package: SMD (SO-16, SOIC-16)

• DC-DC converters

• AC-DC power supplies

• Battery chargers

• Motor control systems

Would you like a datasheet or help finding a suitable replacement?

Approx. Rs 100 / PieceGet Latest Price

The FCX458TA is a high-voltage NPN bipolar junction transistor (BJT) manufactured by Diodes Incorporated. It's designed for applications requiring high voltage and low saturation voltage.

• Collector-Emitter Voltage (VCEO):400 

• Continuous Collector Current (IC):225 m

• Peak Pulse Current (ICM):500 m

• DC Current Gain (hFE):100 (minimum) at IC = 50 mA, VCE = 10 

• Low Saturation Voltage (VCE(sat)):< 200 mV at IC = 20 m

• Power Dissipation:1 

• Transition Frequency (fT):50 MH

• Operating Temperature Range:-65°C to +150°

• Package Type SOT-89 (Surface Moun)

• Pin Count 3

• High-voltage switchng- Amplification applications requiring low saturation voltge

For detailed specifications and electrical characteristics, please refer to the FCX458TA datasheet.

Approx. Rs 250 / PieceGet Latest Price

Here’s a detailed overview of the FM24V02-GTR (also known as FM24V02‑G) by Fairchild/Ramtron/Cypress (now Infineon) – a 256 Kbit Serial I²C F‑RAM IC:

• Ferroelectric RAM (F‑RAM) uses a ferroelectric layer to retain data without power.

• Offers RAM-like speed with EEPROM-like non‐volatility, achieving unlimited write endurance (~10¹⁴ cycles) and 10‑year data retention 

• Capacity: 256 Kbit, organized as 32,768 × 8 bits 

• Interface: I²C at up to 3.4 MHz (High‑Speed mode), also compatible with 100 kHz/400 kHz standard buses Voltage Range: 2.0 V to 3.6 V Access Time: ~130 ns .

• Current Consumption: Active read <150 µA, standby ~90 µA, sleep ~5 µA 

• Endurance & Retention: 10¹⁴ read/writes; ≥10 years Temperature Range: –40 °C to +85 °C .

• Package: 8‑pin SOIC (SOP‑8) surface‐mount 

• Obsolete Status: The FM24V02‑GTR is officially obsolete, but the newer FM24V02A variant is available 

• No-write‑delay (“NoDelay™”) – writes complete at bus speed, no internal polling needed 

• High durability – far exceeds EEPROM in write cycles.

• Low-power operation, ideal for frequent writes.

• Drop-in EEPROM replacement – same interface and form factor.

Perfect for applications needing frequent or fast non-volatile writes:

• Data loggers

• Industrial control systems

• Energy metering

• Configuration storage

• Battery-backed or low-power memory systems

• FM24V02A‑GTR – same capacity and improved specs; widely available FM24V05‑GTR – double capacity (512 Kbit).

• Consider EEPROM alternatives only if endurance and write-speed are not critical.

If you'd like help with the full datasheet PDF, pinout diagrams, or guidance on sourcing and pricing in Mumbai, just let me know!

Approx. Rs 9,000 / PieceGet Latest Price

Here are the technical details for the SK 50 DGDL 12T4 T IGBT module from Semikron Danfoss:

• Part Number: SK 50 DGDL 12T4 T (Semikron internal code 24914820)

• Module Family: SEMITOP 4

• Topology: 3-phase Converter‑Inverter‑Brake (CIB) – 6-pack full‑bridge

• Chip Tech: IGBT4 Trench (latest generation) with CAL4 freewheeling diode 

• Enhanced Thermal Performance: Aluminium oxide substrate improves heat dissipation Latest IGBT4 Technology: Offers lower conduction losses and enhanced switching characteristics 

• Rugged Freewheeling Diode: CAL4-grade diode built-in for high reliability Occupies Minimal Profile: Compact SEMITOP 4 form factor at just 12 mm in height 

• Three-phase inverters up to ~26 kVA

• Motor drives with ~15 kW typical output

• Brake and regenerative converter stages

• Industrial servo drives, UPS systems, AC chillers 

• Official PDF datasheet is available (e.g., via Semikron or Octopart) which provides comprehensive electrical and thermal characteristics 

• You can download CAD footprints and thermal profiles from Semikron’s Download Center 

The SK 50 DGDL 12T4 T is a robust, compact, and thermally efficient full-bridge IGBT module suitable for mid-range industrial power electronics applications (up to ~26 kVA). Its modern Trench 4 IGBTs, CAL4 diodes, and integrated thermal sensing make it ideal for applications requiring durability and high performance.

Would you like help with data such as VCE(sat), switching loss curves, recommended gate drive circuits, or alternative modules?

Approx. Rs 550 / PieceGet Latest Price

The ADUM1311ARWZ is a triple-channel digital isolator from Analog Devices, part of their iCoupler® family of isolation ICs designed for high‑speed data transfer with robust electrical isolation:

• Three independent channels of digital isolation, with 2 inputs on side 1 and 1 input on side 2, supporting bidirectional logic communication 

• Operates over a wide supply voltage range of 2.7 V to 5.5 V, ideal for mixed-voltage domain systems 

• Data rate: up to 1 Mbps, making it suitable for general-purpose digital interfaces

• Common-mode transient immunity (CMTI): minimum 25 kV/µs, ensuring resistance to fast voltage transients

• Isolation rating: 3.75 kV RMS (≈ 3750 V) per UL 1577 certification, suitable for applications requiring high-voltage segregation safety standards 

• Propagation delay: up to ~100 ns with a maximum pulse-width distortion of about 40 ns 

• Operating temperature range: −40 °C to +105 °C, suitable for harsh industrial conditions 

• Package: 16‑lead SOIC‑wide (WSOIC, ~7.5 mm width), surface-mount device 

• Isolating SPI, RS‑232, RS‑422, or RS‑485 digital interfaces

• Connection between microcontrollers and data converters or sensor signals in high-voltage environments

• Use in industrial automation, power systems, or medical electronics where ground-reference separation is essential 

Analog Devices’ iCoupler® technology uses integrated air-core micro-transformers instead of LEDs (as in optocouplers), offering advantages such as lower power consumption, higher reliability, improved channel density, and more stable performance over temperature and lifetime .

If your part notation “ADUM1311ARWZ” is correct, it is the base version rated for 1 Mbps. There are variants like ADUM1311BRWZ (10 Mbps) that suit faster interface needs—but since you requested the ARWZ variant, the specs above apply. The suffixes like RL1 often indicate reel packaging but do not affect electrical characteristics 

• Datasheet: The full technical datasheet (Rev. K) contains detailed electrical specifications, timing diagrams, and recommended layout considerations .

• Certifications: UL Certified, CSA Acceptance, and VDE compliance align with global safety standards 

If you need help choosing between variants (e.g. ARWZ vs. BRWZ), want electrical timing parameters, or need application notes or footprint recommendations, feel free to ask!

Approx. Rs 14,500 / PieceGet Latest Price

The LT305S is a current transducer from LEM (Liaisons Électroniques et Mécaniques), designed for accurate measurement and monitoring of electrical currents in various applications. It typically uses the Hall effect to provide electrical isolation and precise current measurement, which is crucial for protecting sensitive circuits and providing reliable feedback in control systems.

• Type: Hall effect-based current transducer
• Measurement Range: Typically designed to measure DC and AC currents with high accuracy, offering a wide range from a few milliamps to several hundred amps, depending on the specific model.
• Output Signal: Provides an analog output voltage that is proportional to the measured current. The output is typically ratiometric to the supply voltage, meaning the output is scaled according to the supply voltage.
• Supply Voltage (Vcc): Typically 12V to 15V, with some variants offering broader voltage ranges.
• Accuracy: High accuracy, often with low offset voltage and low drift over time and temperature, ensuring stable performance across various conditions.
• Current Measurement: Bidirectional current measurement (can measure both positive and negative current) and often includes zero-crossing detection for precise current switching.
• Isolation Voltage: Provides galvanic isolation between the primary current-carrying conductor and the output, protecting the measurement system from high-voltage spikes and surges.
• Package Type: Usually available in SMD or through-hole packages, depending on the design requirements.

• High Accuracy: Provides precise measurement even in environments with noisy electrical signals or fluctuating currents.
• Galvanic Isolation: Ensures safety by isolating the high-current side from the low-voltage electronics.
• Bidirectional Measurement: Measures both positive and negative currents with ease, making it versatile for AC and DC current applications.
• Wide Temperature Range: Designed to operate reliably across a wide temperature range, suitable for industrial and automotive applications.
• Low Offset Voltage: Helps maintain high accuracy over time, reducing the need for frequent calibration.
• Low Power Consumption: Typically designed for energy-efficient applications, consuming minimal power while providing accurate current readings.

• Power Monitoring: Used in power supplies, electric vehicles, industrial machinery, and battery management systems to monitor the current flow and ensure system stability.
• Energy Meters: Utilized in smart meters and other energy measurement devices for accurate current sensing.
• Overcurrent Protection: Often used in overcurrent protection circuits to detect excessive current and trigger protective mechanisms.
• Motor Control: Used to monitor the current in motor drives, enabling efficient motor control and protection.
• Automotive: Can be applied in automotive systems for monitoring battery current, alternator output, and other electrical systems.
• Renewable Energy: Suitable for monitoring current in renewable energy systems like solar or wind power converters.

The LT305S is highly valued in applications requiring precise current sensing, electrical isolation, and high reliability, especially in industrial, automotive, and energy management systems.

If you need more specific guidance on how to use this transducer or help with circuit design, feel free to ask!

Approx. Rs 750 / PieceGet Latest Price

The A3987SLPT is a microstepping motor driver IC produced by Allegro Microsystems. It is designed to drive bipolar stepper motors with high precision and control, commonly used in applications like robotics, printers, and CNC machines.

• Type: Bipolar Stepper Motor Driver
• Output Drive: It can drive a bipolar stepper motor with a current rating up to 2.5A (per coil), depending on the cooling and operational conditions.
• Microstepping Control: The A3987SLPT supports microstepping, which allows for smooth motor operation with high resolution (up to 1/16th microstepping). This is beneficial for applications requiring smooth and precise motion control.
• Voltage: It operates with a motor supply voltage of 8V to 35V, making it versatile for different motor setups.
• Interface: The IC provides a set of control inputs for setting the stepping mode, enabling features like full-step, half-step, and microstepping. It also features direction, step, and enable inputs for controlling the motor.
• Current Control: The A3987SLPT has internal current control with linear and PWM (Pulse-Width Modulation) current regulation, which helps reduce heat generation and improve the overall efficiency of the motor.
• Protection Features:
  • Overcurrent protection to prevent damage to the IC and motor.
  • Thermal shutdown to protect the device from overheating.
  • Undervoltage lockout to ensure the motor only operates when the supply voltage is adequate.

• The SLPT suffix indicates that the device is housed in a Low-Profile Thin Shrink Small Outline Package (TSSOP), which is a surface-mount package commonly used for space-constrained designs.

• Microstepping Capability: Provides smooth and precise control over the motor, reducing vibrations and improving the overall performance.
• High Efficiency: The integrated current regulation system minimizes power losses and reduces the need for external components.
• Flexible Control: Offers a wide range of control features, including the ability to set stepping mode, direction, and motor speed via external logic signals.
• Compact Design: The small package makes it ideal for space-sensitive designs.

• Robotics: Often used in robotic actuators and motion systems, where precise control of stepper motors is required.
• 3D Printers: Frequently used in 3D printing applications for controlling the motors that move the print bed or extruder.
• CNC Machines: Used in CNC (Computer Numerical Control) systems for accurate positioning and movement of machine parts.
• Automated Systems: Ideal for industrial automation applications where stepper motors need to be driven with high precision and efficiency.

If you need further details or a specific application of this IC, feel free to ask!

Approx. Rs 400 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: Radhe Krishna components, we have huge stock of hard to find original products with over 10000+ parts ready available for immediate dispatch.

Approx. Rs 80 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 200 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 100 / PieceGet Latest Price

The RGP02-20 is a general-purpose rectifier diode manufactured by Zowie Technology Corporation, commonly used in various electronic circuits for rectification and protection purposes.

1. Type: General-purpose rectifier diode.
2. Reverse Voltage (VR_R): 200V.
3. Forward Current (IF_F): Typically rated at 2A continuous.
4. Forward Voltage Drop (VF_F): Typically around 1.1V at the rated forward current.
5. Reverse Recovery Time (trr_rr): 150ns, making it suitable for high-frequency applications.
6. Package Type: Axial lead, often in a DO-41 or similar SMD package.
7. Operating Temperature: Typically from -65°C to +150°C.
8. Applications:
   • AC-to-DC rectification.
   • Freewheeling diodes in inductive circuits.
   • General rectification in power supplies.
   • Snubber circuits.

• High surge current capability.
• Low reverse leakage current.
• Reliable performance in harsh conditions.

The RGP02-20 is used in:

• Power supplies.
• Battery chargers.
• Motor control circuits.
• General electronic projects requiring rectification.

For detailed electrical characteristics and thermal parameters, refer to the official datasheet provided by Zowie Technology Corporation. You can also contact authorized distributors or visit their official website for more information.

Approx. Rs 15,000 / PieceGet Latest Price

The SEMiX291D16S is a high-performance bridge rectifier module manufactured by SEMIKRON Danfoss, designed for efficient power conversion in industrial applications.

Key Specifications:

• Current Rating: 232 A
• Voltage Rating: 1600 V
• Surge Current Capability: 1380 A
• Dimensions: 138 x 71 x 17 mm
• Housing Type: SEMiX 13
• Mounting: Press-fit, screw
• Terminal Height: 17 mm
• UL Recognition: File No. E63532

Features:

• Direct Soldering: Chips are soldered directly to an isolated substrate, enhancing thermal and electrical performance.
• High Surge Capability: Designed to handle high surge currents, making it suitable for demanding applications.
• Efficient Heat Management: The module's design facilitates effective heat dissipation, contributing to its reliability and longevity.

Typical Applications:

• Input Bridge Rectifiers: Ideal for AC/DC motor control systems.
• Power Supplies: Suitable for various power supply applications requiring robust rectification.

For detailed technical information, including electrical characteristics, thermal management, and application guidelines, please refer to the SEMiX291D16S datasheet. citeturn0search0

If you require further assistance with integrating the SEMiX291D16S into your design or have specific questions regarding its operation, feel free to ask!

Approx. Rs 1,000 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: Radhe Krishna components, we have huge stock of hard to find original products with over 10000+ parts ready available for immediate dispatch.

Approx. Rs 350 / PieceGet Latest Price

The 2SK1217 is an N-channel MOSFET manufactured by Fuji Electric. Here are its key specifications:

• Type: N-Channel MOSFET
• Voltage Rating (Vds): 900V
• Current Rating (Id): 5A
• Power Dissipation (Pd): 50W
• Rds(on) (Drain-Source On-Resistance): Typically ~3Ω
• Gate Threshold Voltage (Vgs(th)): 2.5V - 4.0V
• Package: TO-3P
• Technology: High-voltage switching MOSFET

• Switching power supplies
• High-voltage converters
• Motor drivers
• Power amplifiers

Would you like the datasheet or a recommendation for a modern replacement?