New Items

Approx. Rs 1,250 / PieceGet Latest Price

The M81738FPTB0G is a MITSUBISHI SMD IC, which is part of a microcontroller or driver IC series typically used for automotive or industrial applications. It is commonly found in automotive control systems and motor drive circuits, but specific details about this part can vary depending on its exact application.

Here are some general details about the M81738FPTB0G:

1. Motor Control IC: It may be used for controlling motors, which is common in automotive and industrial systems.
2. Microcontroller Features: It could feature integrated components such as logic circuits, power drivers, or communication interfaces, depending on its use case.
3. Integration: Likely integrates various functions into a single package, reducing the need for multiple separate components.
4. Automotive Applications: Due to its part number and manufacturer, this part might be tailored for automotive environments, where robustness, reliability, and power efficiency are critical.

To find precise application details, it's often necessary to refer to the datasheet or technical reference for the M81738FPTB0G, which will contain specific electrical characteristics, pin configuration, and typical use cases.

If you'd like more detailed specifications or a datasheet, I can help you locate that.

Approx. Rs 250 / PieceGet Latest Price

The HX1198NL is a transmission line driver/receiver integrated circuit (IC) manufactured by Pulse Electronics. It is typically used for high-speed data transmission in communication systems, and it is designed to drive transmission lines with controlled impedance to minimize signal reflections and maintain signal integrity over long distances.

• Type: Transmission Line Driver/Receiver IC
• Speed: Supports high-speed data transmission with fast rise and fall times, making it suitable for high-frequency communication systems.
• Voltage Range: Typically operates with a 5V power supply, but it is essential to confirm the exact supply voltage by checking the datasheet.
• Low Power Consumption: Designed to operate efficiently with low power requirements while maintaining fast switching performance.
• Controlled Impedance: The IC is designed to drive transmission lines with a controlled impedance, helping to reduce signal reflections and losses during high-speed data transmission.
• Differential Signal: Utilizes differential signal transmission, which is more resilient to noise and interference compared to single-ended signals, making it ideal for long-distance communication and high-speed data applications.
• Output Drivers: Provides differential outputs with sufficient drive strength to maintain signal integrity over a distance.
• Package Type: SOIC-8 or other small package options (depending on the variant), suitable for space-constrained designs in electronic systems.

1. High-Speed Data Transmission: The HX1198NL is optimized for high-speed communication applications, making it ideal for systems that require fast data transfer with minimal delay.
2. Reduced Signal Loss: With differential signaling and the ability to drive transmission lines with controlled impedance, it helps reduce signal reflections, ensuring that the data remains accurate over long distances

• Data Communication Systems: Used in high-speed data communication systems, such as Ethernet, RS-485, and serial data links, where differential signaling and transmission line driving are required.
• Networking Equipment: Often found in networking devices like routers, switches, and modems to facilitate high-speed data transfer between devices.
• Industrial Automation: Used in industrial control systems .
• Embedded Systems: In embedded systems, the HX1198NL can be used for inter-device communication, especially when long-distance or noise-resistant communication is required.
• Test Equipment: Can be used in test and measurement applications to interface with high-speed data acquisition systems and other test instruments.

When integrating the HX1198NL into a system, ensure that the following design considerations are addressed:

• Impedance Matching: Ensure that the transmission line is correctly matched to the characteristic impedance of the driver and receiver to avoid signal reflections and data corruption.
• Power Supply: The IC typically operates at 5V but verify the exact voltage requirements from the datasheet for correct integration into your system
• Termination: Proper termination of the transmission line at the receiver end is necessary to ensure that the signal is correctly received without reflections

Would you like more specific details on the HX1198NL datasheet, recommended circuits, or guidance on integrating it into a specific application?

Approx. Rs 200 / PieceGet Latest Price

The 74VHC164 is a Philips (now NXP Semiconductors) SMD (Surface-Mount Device) IC, which is an 8-bit serial-in, parallel-out shift register. Here are its key features and specifications:

• High-Speed Operation: The 74VHC164 operates at high speeds, making it suitable for high-frequency applications.
• Shift Register Function: It takes in data serially and shifts it out in parallel. It allows the transfer of 8 bits of data into a parallel output.
• VHC (Very High-Speed CMOS) Technology: This provides low power consumption and high-speed logic operations, making it efficient for digital systems.
• Wide Voltage Range: It operates with a supply voltage range from 2V to 5.5V, allowing flexibility in various systems.
• Low Power: The IC is designed for low power consumption while maintaining high-speed performance.
• Direct Input/Output Connection: The data is shifted in serially and can be accessed directly from 8 parallel outputs.
• Asynchronous Operation: The shift register operates asynchronously, which means it can be clocked with external signals.

• Digital communication systems: Used for shifting and storing data between serial and parallel interfaces.
• Microcontroller interfacing: Expanding the number of I/O pins or controlling multiple devices from a microcontroller.
• LED driving: Used for driving large arrays of LEDs, often in digital display systems.
• Data transmission: In serial communication systems for converting serial data streams into parallel data.
• Memory extension: Can be used in systems where memory expansion is needed for storing 8-bit data in parallel.

• The 74VHC164 is typically available in an 8-pin SOIC (Small Outline Integrated Circuit) or 8-pin TSSOP package for surface-mount applications.

This IC is widely used in applications where there is a need to interface between serial and parallel data systems, especially in consumer electronics, communication, and control systems.

Approx. Rs 1,000 / PieceGet Latest Price

The BUF634 is a high-speed, unity-gain buffer amplifier developed by Burr-Brown (now part of Texas Instruments). It is designed to provide high output current and bandwidth, making it suitable for a wide range of applications. citeturn0search0

Key Specifications:

• Output Current: 250 mA
• Slew Rate: 2000 V/µs
• Bandwidth: Adjustable from 30 MHz to 180 MHz
• Quiescent Current: 1.5 mA (at 30 MHz bandwidth)
• Supply Voltage Range: ±2.25 V to ±18 V

Features:

• High-Speed Operation: Suitable for applications requiring fast signal processing.
• Adjustable Bandwidth: Bandwidth can be set between 30 MHz and 180 MHz by connecting a resistor between the V– and BW pins.
• Low Quiescent Current: Operates with low power consumption, enhancing energy efficiency.
• Protection Features: Includes internal current limit and thermal shutdown protection for reliable operation.

Applications:

• Valve and Solenoid Drivers: Provides the necessary current and speed for controlling valves and solenoids.
• Operational Amplifier Current Booster: Enhances the output current capability of op-amps.
• Line Drivers: Suitable for driving long transmission lines with high-speed signals.
• Headphone Drivers: Delivers sufficient power to drive headphones effectively.
• Video Drivers: Capable of handling high-frequency video signals.
• Motor Drivers: Provides the necessary current for controlling motors.
• Test Equipment: Useful in various test and measurement applications requiring high-speed buffering.

For detailed technical information, including electrical characteristics, timing diagrams, and application guidelines, please refer to the BUF634 datasheet. citeturn0search0

If you require further assistance with integrating the BUF634 into your design or have specific questions regarding its operation, feel free to ask!

Approx. Rs 550 / PieceGet Latest Price

The TDE1898CFP is an integrated circuit (IC) from STMicroelectronics. It is a high-performance audio power amplifier, specifically designed for Class AB operation, which combines the efficiency of Class B amplifiers with the low distortion characteristics of Class A amplifiers.

• Type: Audio Power Amplifier (Class AB)
• Output Power: Typically up to 35W per channel at 4Ω load (depending on voltage supply and thermal management)
• Supply Voltage (Vcc): Typically 14V to 28V (depending on the application and output power requirements)
• Package Type: Typically available in a CFP (Chip Form Package) or other power-oriented packages suitable for efficient heat dissipation.
• Low Total Harmonic Distortion (THD): Ensures high-quality audio output with minimal distortion.
• Thermal and Short-Circuit Protection: Built-in protection features that prevent the IC from damage due to overheating or short circuits.

• High Output Power: Suitable for driving high-power speakers in home audio systems or car audio applications.
• Low Distortion: Class AB operation offers a good balance of efficiency and sound quality, with low harmonic distortion compared to traditional Class B amplifiers.
• Thermal and Overload Protection: Built-in features to protect the IC from excessive temperatures or overcurrent conditions, ensuring long-term reliability.
• Low Noise: Designed for audio applications, the IC features low noise operation, improving the quality of audio signals.
• High Efficiency: Class AB design provides good efficiency while maintaining a high level of sound fidelity.

• Home Audio Systems: Used in the amplification stages of home stereo systems, providing high-quality sound output.
• Car Audio Systems: Commonly used in car amplifiers to drive high-power speakers.
• Public Address Systems: Suitable for PA systems where clear and powerful audio amplification is required.
• Portable Audio Systems: Can be used in portable audio amplifiers for both consumer and professional applications.

The TDE1898CFP is designed to deliver high-quality audio amplification in a variety of consumer and professional audio applications, balancing power efficiency and low distortion for clear sound reproduction.

If you'd like more details or circuit examples of how to use it, feel free to ask!

Approx. Rs 250 / PieceGet Latest Price

Here’s a detailed breakdown of the NCP4304A from ON Semiconductor:

The NCP4304A is a fully integrated controller and gate driver designed for secondary-side synchronous rectification (SR) in switch-mode power supplies like flyback, forward, and LLC resonant topologies .

• Zero-current detection: Precisely senses when current crosses zero, enhancing efficiency .

• Parasitic-inductance compensation: Dedicated input pin (COMP) helps to correct for PCB/MOSFET package parasitic inductances.

• Fast turn-off: Typically 40 ns delay from current-sense input to gate release .

• Gate-drive capability: Can source/sink up to 5 A/2.5 A peak, enabling rapid MOSFET switching .

• Supply voltage: Operates up to 30 V.

• Adjustable timing: External control for minimum on/off times to suppress ringing and optimize switching .

• Trigger/Disable input: Can enable/disable the gate driver, allowing low-power standby .

• Available in SOIC‑8 and DFN packages (NCP4304ADR2G, NCP4304AMNTWG) .

• Typical application: referenced in ON Semiconductor’s LLC converter design using this IC .

Widely used in high-efficiency SMPS including:

• Notebook adapters

• Server and ATX power supplies

• Game console power supplies

• Other compact power systems requiring efficient synchronous rectification.

• Compensation pin mitigates gate timing errors due to parasitic inductance, maximizing MOSFET conduction duration .

• Datasheet provides design equations and thermal considerations for gate driver power losses and junction temperature calculations .

• Rated for V_DS sensing up to ~200 V, enabling robust zero-current detection across many secondary-side voltages 

The NCP4304A is a high-performance secondary-side gate driver tailored for achieving high-efficiency synchronous rectification in modern SMPS. Its quick turn-off, inductance compensation, zero-current sensing, and strong gate drive make it ideal for high-power, low-noise power supplies.

Approx. Rs 350 / PieceGet Latest Price

Here's a detailed overview of the TPS40057 IC by Texas Instruments:

The TPS40057 is a high-performance synchronous buck controller designed for DC-DC step-down applications. It supports wide input voltage ranges and offers adaptive voltage positioning with voltage-mode control and synchronous rectification, which helps improve efficiency.

• Input Voltage Range: 4.5 V to 40 V

• Output Voltage Range: As low as 0.7 V

• Operating Frequency: Adjustable from 100 kHz to 1 MHz

• Synchronous Rectification: Improves efficiency at higher currents

• Voltage-Mode Control

• Adjustable Soft-Start

• Power Good Output Monitor

• Thermal Shutdown Protection

• Current Limit with Hiccup Recovery

• Internal 5V Regulator (for biasing gate drivers)

• Distributed Power Architectures

• Point-of-Load Regulation in DSP, FPGA, ASIC

• Networking, Telecom, Industrial Systems

• High-Efficiency Power Conversions

• TPS40057PW – TSSOP-16 package

• TPS40057PWPR – Tape & Reel

If needed, I can provide the official TI datasheet PDF or help create a reference design using this controller.

Let me know if you'd like:

• Equivalent alternatives (e.g., TPS40055, TPS40170)

• A sample buck converter circuit using the TPS40057

• Thermal and layout guidelines

Approx. Rs 350 / PieceGet Latest Price

The FAN7383MX is a Fairchild (now ON Semiconductor) half‑bridge gate‑drive IC, designed for driving MOSFETs/IGBTs up to 600 V. Here are its key specs based on official datasheets:

• Dual source/sink currents: Typically 350 mA sourcing and 650 mA sinking per channel 

• Floating high-side bootstrap support: Handles up to +600 V and allows negative VS voltage of around –9.8 V 

• Programmable dead-time: Internally about 330 ns minimum, adjustable via resistor 

• Built-in protections: Includes UVLO (undervoltage lockout), shoot-through prevention, and dv/dt noise cancellation 

• Logic input compatible: 3.3 V/5 V compatible 

• Comes in a 14‑lead SOP (SMD) package.

• Status: Discontinued (“obsolete”, not in production) . Official datasheet still available for reference.

• Half‑ or full‑bridge inverters

• SMPS (Switch-Mode Power Supplies)

• Motor drives

• Ballast circuits for lamps and HID lighting 

The FAN7383MX remains a capable half‑bridge gate driver with strong drive currents, high-voltage operation, and integrated protection features. However, it's discontinued, so procurement may require existing inventory or moving to a close alternative like the FAN7383 (same basic functionality), or the 16-pin FAN73832/33 variants, which have similar specs 

If you're redesigning or sourcing components:

• Pros: Good performance, integrated protections, direct bootstrap capability.

• Cons: No longer in production – consider newer or still-supported ON Semiconductor equivalents like the FAN73832/33 series.

Let me know if you'd like help finding a current replacement or sourcing options!

Approx. Rs 150 / PieceGet Latest Price

Here's a detailed overview of the TLO84 IC by Texas Instruments:

The TL084 is a quad op-amp featuring JFET (Junction Field-Effect Transistor) inputs, offering very high input impedance, low bias currents, and low input offset voltage. It's optimized for low-noise, high-speed analog applications.

This IC includes four independent op-amps in a single package, ideal for space-saving in analog systems.

• TL084CN – DIP-14 (Plastic Dual In-line)

• TL084CP – DIP variant

• TL084ACN, TL084BCN – Higher precision grades

• TL084CD / TL084ID – SOIC-14 (Surface mount)

• Signal conditioning

• Active filters

• Integrators and differentiators

• Audio preamps and equalizers

• Sensor interfacing

• Low-noise analog front-ends

• TL074 – Quad op-amp, similar but slightly lower spec

• TL064 – Lower power variant

• TL081/TL082 – Single/Dual versions of TL084

Would you like a datasheet, SPICE model, or an example application circuit using the TL084?

Approx. Rs 500 / PieceGet Latest Price

Here's a detailed overview of the ACPLC790 by Avago Technologies (now Broadcom):

The ACPLC790 is a digital optocoupler specifically designed for high-speed isolation between high-voltage systems and low-voltage logic circuitry. It offers CMOS-compatible outputs and is suitable for signal isolation in industrial, motor control, and power conversion systems.

• High Data Rate: Typically 10 Mbps

• Low Power Consumption

• CMOS Logic Level Compatibility

• Wide Operating Temperature: –40°C to +100°C or more

• High Common Mode Transient Immunity (CMTI): Up to 15 kV/µs

• Low Propagation Delay and Skew

• High Isolation Voltage: Usually 3750 Vrms

• Integrated LED drive and output detection

• IGBT / MOSFET Gate Drive Isolation

• Industrial Inverters

• AC Motor Drives

• Switch Mode Power Supplies (SMPS)

• Data Communication Isolation

• Microcontroller Interface Isolation

Likely pin functions (typical for this type of optocoupler, to be confirmed from datasheet):

(Actual pinout may vary; exact info from datasheet is preferred.)

• The ACPLC790 part number suggests it is part of the ACPL-79x family, which includes:

  • ACPL-790B: 10 Mbps digital optocoupler

  • ACPL-7900/790A: High-speed, low-power digital isolators

To confirm the exact model (ACPL-C790 or ACPL-790B, for instance), a datasheet or suffix is helpful.

Would you like the datasheet, application circuit, or possible equivalents like HCPL-7800, ACPL-332J, etc.?

Approx. Rs 250 / PieceGet Latest Price

The NJM3403AV (also marked “3403A”) from JRC/Nisshinbo is a quad single-supply operational amplifier in SSOP‑14 or TSSOP‑14 packaging. Here's a breakdown:

• Configuration: 4 op‑amps in one SSOP‑14 (or TSSOP‑14) package 

• Supply voltage: +4 V to +36 V (±2 V to ±18 V) 

• Quiescent current: ~3 mA total typical (1 mA per amp); some variants list 5–6 mA 

• Slew rate: ~1.2 V/µs 

• Gain bandwidth: ~1.2 MHz 

• No crossover distortion: A/B class output stage ensures clean transitions 

• Output drive: ±20–30 mA typical 

• Input offset voltage: ~2 mV typical (up to 5 mV max) 

• Operating temperature range: –40 °C to +85 °C 

Ideal for single‑supply audio amplification, filters, instrumentation, and general-purpose analog processing where moderate speed and low distortion are needed.

• SSOP‑14 / TSSOP‑14, also available in DIP‑14 or DMP‑14 

• Variants include NJM3403AV‑TE1, TE2, TE3 – differing mainly in packaging, tape/tray, RoHS compliance 

Approx. Rs 150 / PieceGet Latest Price

Here’s a detailed overview of the TLV62565DBVR from Texas Instruments, a high-performance switching regulator IC:

• Input voltage range: 2.7 V – 5.5 V

• Adjustable output voltage: 0.6 V – 5.2 V, via external resistor divider 

• Max output current: 1.5 A 

• Switching frequency: 1.5 MHz (typical) 

• Quiescent current: ~50 µA (Power Save mode) 

• Shutdown current: < 1 µA 

• Efficiency: up to 95% 

• Integrated features:

  • Adaptive on‑time valley‑current control

  • Synchronous rectifier

  • Over-current and thermal shutdown protections

  • Internal soft‑start (≈ 250 µs)

  • Power‑Save mode for light-load efficiency 

• Package: SOT‑23‑5 (DBV/SC‑74A/SOT‑753), operating range −40 °C to +85 °C Typical applications: Portable devices, DSL modems, HDDs, set-top boxes, tablets 

The TLV62565DBVR is ideal when you're aiming for a compact and efficient power solution. With a 1.5 MHz switching rate, it supports small external components, and its SOT‑23‑5 package helps minimize board space.

If your design includes light-load conditions, its low quiescent current and Power Save mode will help maximize battery life. Plus, built-in protections (OCP, OTP, soft-start) simplify your design and enhance reliability.

• Official TI datasheet (Rev D): SLVSBC1D, 22 pages 

• Stock availability: Digi‑Key (SOT‑23-5) ~US $0.18–0.35 each 

• Alternative supplier: LCSC offers from ~$0.037 at higher qty 

• Review the datasheet, especially pinout, recommended layout, and external component selection (inductor, capacitors).

• Consider your desired output voltage and choose resistor values per TI’s guidelines.

• Evaluate layout guidelines: careful placement of input/output capacitors and SW node is critical for stable operation.

Would you like me to help with PCB footprint, a BOM list (capacitor/inductor recommendations), schematic examples, or comparison with alternative ICs such as TI’s TLV62566 (which includes a Power-Good pin)?

Approx. Rs 300 / PieceGet Latest Price

Here’s a detailed profile of the MIC2506YM from Microchip:

• Device Type: Fully integrated dual 1 A high‑side N‑channel MOSFET switch with built‑in charge pump, designed for high-side load switching and protection .

• Package: 8-pin SOIC (SOIC-8), available in tube (95 units) or tape-and-reel .

• Control Logic: TTL‑compatible active‑high control input; includes fault flag (open-drain) and open‑load detection outputs .

The MIC2506 family integrates both control and power switching functions, eliminating the need for external MOSFETs. It offers:

• A charge-pump-driven gate for the N-MOSFETs.

• TTL logic-level control input and fault-flag diagnostic output.

• Built-in protections: current limiting, thermal shutdown, UVLO, and open-load detection (when switch is off) .

• Typical applications include USB power distribution, battery charging circuits, PCMCIA interfaces, hot-swap, and inrush-limited power supplies .

Pros:

• Integrated dual-output high-side switching solution with diagnostics.

• Efficient soft-start, robust fault protection, low quiescent current.

• Small form factor: SOIC-8 package.

Considerations:

• Max voltage limited to 7.5 V input.

• RDS(on) (~75 mΩ) is suitable for ≤1 A but may cause ~75 mW dissipation per channel—adequate heat management needed.

The MIC2506YM is an effective dual high-side power switch ideal for 3.3–5 V systems requiring controlled power sequencing, fault reporting, and inrush current limiting—perfect for USB, hot-swap, or battery-powered designs.

�� If you’d like, I can fetch the full datasheet PDF, suggest equivalent parts, or help with example circuits featuring it. Just let me know!

Approx. Rs 250 / PieceGet Latest Price

The TMP75 by Burr-Brown (now part of Texas Instruments) is a digital temperature sensor with an I²C interface. Here's a detailed overview:

• Manufacturer: Burr-Brown / Texas Instruments

• Type: Digital Temperature Sensor

• Interface: I²C and SMBus-compatible

• Temperature Range: –40°C to +125°C

• Accuracy: ±1°C (typical), ±2°C (maximum)

• Supply Voltage (Vcc): 2.7V to 5.5V

• Resolution: 9 to 12 bits (programmable)

• Shutdown Mode: Yes, for power saving

• Alert Function: Over-temperature alert output (OS pin)

• Package Options:

  • SOIC-8

  • MSOP-8

• Supports standard and fast I²C modes (up to 400 kHz)

• Programmable thermostat limit registers

• Low power consumption (low µA range in shutdown)

• One-shot mode for minimal power draw

• Compatible with TMP75A (more accurate version)

• Industrial temperature monitoring

• Consumer electronics (e.g., laptops, smartphones)

• HVAC systems

• Embedded systems

• Battery management systems

If you need the datasheet or want to compare it with the TMP75A or similar devices (like TMP100, TMP102), I can help with that too.

Approx. Rs 550 / PieceGet Latest Price

The BTS5215L is a Smart High-Side Power Switch IC from Infineon Technologies. It is part of the PROFET™ (PROtected FET) family designed for automotive and industrial applications.

• Overload protection

• Overtemperature shutdown with auto-restart

• Undervoltage and overvoltage protection

• Short-circuit protection (with latch or restart)

• Reverse polarity protection

• Electrostatic discharge (ESD) protection

• Automotive power distribution

• Lamp or solenoid drivers

• Relay replacement in cars

• Body electronics (e.g., seat heaters, door modules)

• General industrial power switching

Let me know if you need:

• The datasheet

• A pinout diagram

• Application notes or circuit examples

• Suitable alternatives or upgrades (like BTS5210L or BTS50015-1TAD)

Approx. Rs 300 / PieceGet Latest Price

Here’s a detailed overview of the TOP255GN from Power Integrations:

The TOP255GN belongs to the TOPSwitch-HX family—a highly integrated monolithic offline switcher IC for economical, compact flyback power supplies up to ~30 W (195 W open‑frame max across the family).

• Integrated MOSFET: 700 V power transistor + PWM controller + protection circuitry .

• Switching Frequency: ~66 kHz fixed (78% max duty cycle) .

• Output Power:

  • Up to 30 W in open-frame operation at 230 VAC

  • ~22 W in universal-line enclosed design

  • Peak capability ~35 W .

• Protections: Current limiting, over‑temperature, over‑voltage; user-programmable OVP (latching or auto-restart), UVLO and line OV shutdown .

• Efficiency Features:

  • Multi‑mode operation and frequency jitter reduce EMI and eliminate the need for a heatsink up to ~35 W .

  • No-load consumption <200 mW at 230 VAC 

• Package: 8-pin SMD‑8C (eSIP‑7C/F for low-profile adapters) .

• Thermal: Junction-to-case ~2 °C/W (eSIP); operating up to 150 °C .

1. All-in-One Integration: Combines MOSFET, PWM controller, oscillator, soft-start, and fault shutdown in one package.

2. Efficiency & EMI: Soft-start, frequency jittering, line feed-forward, and multi-mode control foster high efficiency and low EMI.

3. Safety & Robustness: Includes hysteretic thermal shutdown, programmable OVP, UVLO, line surge tolerance, and auto-restart limiting faults and open-loop conditions to <3% power .

4. Design Flexibility: Flyback topology support, heatsink mountable to SOURCE pin for EMI control, and available design guides (AN‑43, DER‑217/232/233…) .

• AC‑DC adapters (laptop, phone, set-top boxes)

• Monitors, TVs, printers, digital media players

• Industrial and server standby supplies

• Anywhere ~15–30 W offline flyback power is needed

• Full datasheet (50 pages PDF) with electrical specs, application circuits, and reliability data 

• Discontinued/obsolete at many distributors (Mouser lists “obsolete”; DigiKey stock is limited) ).

• Still available as TOP255GN‑TL variant (tape‑and‑reel) via LCSC and DigiKey (active) 

The TOP255GN is a compact, high-voltage offline switcher ideal for ~15–30 W flyback power supplies. With its integrated MOSFET and advanced EcoSmart features—like multi-mode PWM, jittering, and protection mechanisms—it delivers efficient operation, low EMI, and reliable, heatsink-free performance.

Approx. Rs 200 / PieceGet Latest Price

Here's an overview of the 74HC4066 IC by Philips (now NXP Semiconductors):

The 74HC4066 is a quad bilateral analog switch designed using high-speed CMOS technology. Each switch allows analog or digital signals to pass through in both directions. Control inputs are standard CMOS-compatible digital signals.

• 4 independent switches (quad configuration)

• Low "ON" resistance: Typically ~70Ω at Vcc = 5V

• Wide supply voltage range: 2V to 10V

• High-speed switching: tpd ~ 8 ns at Vcc = 5V

• Low power consumption

• Analog signal range: 0 to Vcc

• Pin-compatible with 4066B (CD4066)

• TTL-level compatible inputs

• Separate control lines for each switch

• Analog signal switching and multiplexing

• Digital signal routing

• Sample-and-hold circuits

• Data acquisition systems

• Audio signal switching

• 74HC4066N – DIP package

• 74HC4066D – SOIC package

• 74HC4066DB – SSOP package

Let me know if you need:

• The datasheet

• Cross-references or equivalents (e.g., CD4066, 74HCT4066)

• Application circuit examples

Approx. Rs 150 / PieceGet Latest Price

Here’s a well‑documented overview of the 74HCT573 (and its CMOS counterpart 74HC573) from NXP (formerly Philips/Nexperia) :

• Type: Octal D‑type transparent latch with 3‑state outputs

• Variants:

  • 74HC573: CMOS logic‑level inputs

  • 74HCT573: TTL‑compatible inputs 

• Primary function: Latch eight input lines (D0–D7) when LE (Latch Enable) is HIGH; when LE is LOW, outputs freeze. The OE (Output Enable) pin can tri‑state (disable) outputs without clearing them .

• Supply voltage: 2.0 to 6.0 V

• High noise immunity & CMOS low-power dissipation

• Clamp diodes on inputs to tolerate over‑voltage when using series resistors 

• Complies with JEDEC standards JESD7A and JESD8C; latch‑up immunity > 100 mA 

• ESD protection: > 2 kV (HBM), > 200 V (MM) 

• Pin count: 20‑pin in SOIC, TSSOP, SSOP, or VQFN packages 

• Pin arrangement:

  • D0–D7 on one side

  • Q0–Q7 on opposite side

  • LE, OE, GND, VCC pins at ends 

• Truth table:

• Propagation delay (tpd): ~5–12 ns at VCC = 4.5 V

• Enable/disable delay (OE control): ~5–20 ns 

• Input setup/hold times: tsu ≈ 7–13 ns, th ≈ 8–16 ns

• SOIC‑20 (SO20 / SOT163‑1)

• TSSOP‑20 (SOT360‑1)

• SSOP‑20, VQFN‑20

• Operates from –40 °C to +85 °C, with some variants rated up to +125 °C 

• Bus interface & buffering

• Microprocessor I/O expansion

• Latching digital data for timing control

• Bus‑oriented systems with tri‑state control

• Nexperia Rev 9 (Aug 2024): Most recent, full spec sheet 

• NXP Rev 7 (Mar 2016): Older, still reliable 

• Obsolescence: Some package variants (e.g., 74HCT573D‑T) may be obsolete; check availability 

• Route the Q outputs opposite D inputs to simplify latching board layout.

• Add series resistors when interfacing to noisy or higher voltage domains—internal clamp diodes help protect pins.

• To avoid bus contention, ensure OE is not asserted on multiple devices simultaneously.

• 74HC573 for pure CMOS logic systems

• ’574 flip‑flop counterpart if edge‑triggered operation is needed

• Single‑ or dual-latch versions like 74HC373, 74HC372, or LV‑series versions if space or supply voltage differ

Would you like help with pin‑exact footprint files (IPC/EAGLE/KiCad), BOM suggestions, timing simulation setups, or identifying drop‑in modern replacements?

Approx. Rs 650 / PieceGet Latest Price

The ADS7810U is a 12-bit, 800 kHz sampling analog-to-digital converter (ADC) that was originally developed by Burr-Brown Corporation, which was later acquired by Texas Instruments. This ADC is designed using CMOS technology and offers a combination of speed and precision suitable for various applications.

Key Features:

• High Sampling Rate: Capable of sampling at speeds up to 800 kHz, making it suitable for applications requiring rapid data acquisition.

• 12-Bit Resolution: Provides a resolution of 12 bits, allowing for precise analog-to-digital conversion.

• Standard ±10V Input Range: Equipped with laser-trimmed scaling resistors to support a standard ±10V input range, facilitating compatibility with various signal levels.

• Single 5V Supply Operation: Operates efficiently from a single 5V power supply, simplifying power management in system designs.

• Integrated Features: Includes an internal sample-and-hold circuit, reference, clock, and a microprocessor-compatible interface with three-state output drivers, providing a comprehensive solution for analog-to-digital conversion needs.

Applications:

• Data acquisition systems

• Digital signal processing

• Medical instrumentation

• Industrial process control

• Communication systems

For detailed specifications, electrical characteristics, and application guidelines, please refer to the .

Approx. Rs 350 / PieceGet Latest Price

The 75ALS181 is an arithmetic logic unit (ALU) manufactured by Texas Instruments (TI). It is a high-speed, low-power, TTL-compatible ALU, designed for arithmetic and logic operations in computing and data processing applications.

1. Type: Arithmetic Logic Unit (ALU).
2. Functionality:
   • Performs 16 arithmetic and logic operations.
   • Includes operations like addition, subtraction, AND, OR, XOR, and shift.
3. Operating Voltage: Typically operates at 5V (TTL logic level).
4. High-Speed Operation: Designed for high-performance computation.
5. Low Power Consumption: Belongs to the ALS (Advanced Low Power Schottky) series for reduced power usage compared to standard TTL.
6. Package:
   • Surface-Mount Device (SMD), often available in SOIC or other compact package types.
7. Temperature Range: Industrial-grade temperature range (-40°C to +85°C) is typical, but confirm with the specific part variant.

• TTL-compatible inputs and outputs.
• Capable of handling complex computational tasks in a compact IC.
• Designed for integration into larger digital systems.

• Digital computing systems.
• Data processing and control units.
• Embedded systems requiring arithmetic and logical computation.
• Educational and experimental hardware.

To integrate the 75ALS181 into your design:

• Refer to the Texas Instruments datasheet for pin configurations, truth tables, and detailed timing diagrams.
• Visit the Texas Instruments website or authorized distributors for availability and support.

Ensure compatibility with your design requirements by checking the full part number, as variations may exist for different packages or extended temperature ranges.

Approx. Rs 250 / PieceGet Latest Price

The EUP3482 is a synchronous current-mode buck regulator from Eutech Microelectronics, designed to deliver a continuous load current of up to 2A with excellent line and load regulation. It operates over a wide input voltage range and is suitable for various applications requiring efficient step-down voltage conversion.

Key Specifications:

• Input Voltage Range: 4.5V to 30V
• Output Voltage Range: Adjustable from 0.923V to 12V
• Continuous Output Current: Up to 2A
• Switching Frequency: 340kHz
• Integrated Switches: 175mΩ high-side and 125mΩ low-side DMOS
• Efficiency: Up to 93%
• Shutdown Current: 1µA
• Protection Features: Overcurrent protection, thermal shutdown, input overvoltage, and undervoltage lockout
• Package: SOP-8

Features:

• Synchronous rectification for improved efficiency
• Programmable soft-start to minimize inrush current and prevent output overshoot during startup
• Cycle-by-cycle current limiting
• RoHS compliant and 100% lead (Pb)-free, halogen-free

Applications:

• Distributed power systems
• Networking systems
• PC monitors
• Portable electronics

For detailed electrical characteristics and application guidelines, refer to the EUP3482 datasheet.

In Mumbai, Maharashtra, India, the EUP3482 IC can be sourced from various electronic component distributors. It's advisable to check with authorized Eutech distributors or reputable online platforms for availability and purchasing options.

Approx. Rs 250 / PieceGet Latest Price

The RT8482 is a current-mode PWM controller from Richtek, designed to drive an external MOSFET for high-current LED applications. It supports various topologies, including buck, boost, or buck-boost configurations, making it versatile for different design requirements.

Key Specifications:

• Input Voltage (V_IN): Up to 36V
• Output Voltage (V_OUT): Up to 48V
• Switching Frequency: 350kHz
• Dimming Methods: Supports both analog and PWM dimming
• Package Types: Available in 16-lead WQFN (3x3) and SOP packages

Features:

• Current-mode PWM with a 350kHz switching frequency
• Programmable soft-start to prevent inrush current
• Over-voltage protection
• Under-voltage lockout and thermal shutdown
• RoHS compliant and halogen-free

Applications:

• Industrial high-power LED lighting
• Desk and room lighting
• Building and street lighting
• Industrial display backlighting

For detailed electrical characteristics and application guidelines, refer to the RT8482 datasheet.

In Mumbai, Maharashtra, India, the RT8482 IC can be sourced from various electronic component distributors. It's advisable to check with authorized Richtek distributors or reputable online platforms for availability and purchasing options.

Approx. Rs 100 / PieceGet Latest Price

The IRFL9014 is a power MOSFET manufactured by Vishay (originally by International Rectifier, now a part of Vishay). It is an N-channel MOSFET designed for low-voltage switching applications.

• Rugged and reliable HEXFET® technology

• Fast switching performance

• Low RDS(on) for efficient operation

• Avalanche rated

• Suitable for SMD applications

• DC-DC converters

• Load switching

• Motor control

• Power management in portable devices

• LED drivers

Let me know if you’d like the datasheet PDF, equivalent alternatives, or SPICE model for simulation.

Approx. Rs 450 / PieceGet Latest Price

Additional Information:

• Delivery Time: REDY STOCK

Approx. Rs 450 / PieceGet Latest Price

The 2114SCO is an integrated circuit (IC) from Power Integrations, a company known for its power management and conversion solutions. The 2114SCO belongs to Power Integrations' TinySwitch™ family, which is designed for low-power switching applications, particularly in power supply designs.

• Type: Switching Regulator – The 2114SCO is a high-efficiency switch-mode power supply (SMPS) controller designed for use in various power conversion applications, including AC-DC adapters, battery chargers, and other low-power supply designs.
• Package Type: SOP-8 package (Small Outline Package), which is a surface-mount device (SMD), suitable for compact PCB designs and automated assembly.
• Switching Mode: The device is a flyback converter. It integrates a high-voltage power switch (typically a MOSFET) to directly drive the transformer in a flyback topology, which is commonly used in power supplies for efficient energy conversion.
• Integrated Power Switch: The 2114SCO features an integrated power MOSFET (rated at 700V) that reduces component count and simplifies design.
• Efficient Power Conversion: It provides high efficiency at low load currents, making it ideal for use in energy-efficient power supplies and battery-operated devices.
• Output Voltage Control: The IC provides tight output voltage regulation through feedback control and internal circuitry, ensuring stable output voltage even with variations in input voltage and load conditions.
• Overload Protection: The 2114SCO includes integrated protection features such as overload protection, short-circuit protection, and thermal shutdown, improving the reliability and safety of power supplies.
• Low Standby Power: It features very low standby power consumption, making it suitable for low-power and energy-efficient designs.
• Operating Voltage: The device operates over a wide input voltage range, typically 85V to 265V AC, suitable for universal AC input power supplies.

1. Integrated Solution: The 2114SCO integrates both the power switch and control circuitry, which simplifies design and reduces the need for external components like high-voltage MOSFETs and diodes.
2. Compact Design: The SOP-8 package is small, which makes it ideal for compact power supply designs where space is limited.
3. High Efficiency: The IC provides high efficiency at low load conditions, which is important for reducing energy consumption and maintaining thermal performance in small, enclosed spaces.
4. Low Standby Power: The low standby power consumption is an important feature for applications like chargers and standby power supplies, where power efficiency is a critical consideration.
5. Protection Features: The IC includes built-in overcurrent, overvoltage, thermal shutdown, and short-circuit protection, helping to safeguard both the IC and the load from damage due to abnormal operating conditions.
6. Ease of Use: The TinySwitch family is designed for easy integration into power supply designs, with simple feedback loop control and minimal external components.

Approx. Rs 650 / PieceGet Latest Price

Additional Information:

• Delivery Time: REDY STOCK

Approx. Rs 550 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 450 / PieceGet Latest Price

Additional Information:

• Delivery Time: REDY STOCK

Approx. Rs 2,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: ready stock
• Packaging Details: Radhe Krishna components, we have huge stock of hard to find original products with over 10000+ parts ready available for immediate dispatch.

Approx. Rs 750 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 2,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: Radhe Krishna components, we have huge stock of hard to find original products with over 10000+ parts ready available for immediate dispatch.

Approx. Rs 450 / PieceGet Latest Price

The STK681-320 is a power amplifier IC from Sanyo Electric (now part of ON Semiconductor). It is part of the STK681 series, which includes power amplifier ICs commonly used in audio and motor control applications.

• Type: Audio Power Amplifier IC
• Package Type: SMD (Surface Mount Device), typically in a multi-pin package designed for high-power applications.
• Output Power: Capable of delivering up to 100W of output power (depending on the specific application and supply voltage), typically used for driving speakers in audio systems.
• Class: Class AB audio amplifier, offering a good balance between power efficiency and linearity for high-quality audio amplification.
• Supply Voltage: Typically operates with ±35V to ±40V for audio applications, depending on the design and system requirements.
• Output Impedance: Designed to drive 8Ω or 4Ω loads, commonly used in audio amplifier circuits for consumer or professional audio equipment.
• Low Distortion: Designed to provide high-fidelity audio output with low total harmonic distortion (THD), ensuring clear sound quality.
• Thermal Protection: Includes built-in protection circuits for overcurrent and overtemperature, preventing damage to the IC during abnormal operating conditions.

• High Output Power: The STK681-320 is capable of delivering significant output power (up to 100W), making it suitable for high-performance audio systems.
• Class AB Operation: Offers a good trade-off between audio fidelity and power efficiency, commonly used in home audio, car audio, and professional sound systems.
• Thermal and Overcurrent Protection: Built-in thermal protection ensures safe operation even under high load conditions, protecting the IC and other components from damage.
• Low Total Harmonic Distortion (THD): This ensures that the amplifier provides high-quality, clean audio amplification without significant distortion.
• High-Fidelity Audio Performance: Designed for use in systems where high-quality sound reproduction is essential.

The STK681-320 is commonly used in:

• Audio Amplifiers: For driving speakers in home audio systems, car audio systems, or public address systems.
• AV Receivers: In audio-video receivers (AVRs) for delivering high-power audio output to speakers.
• PA Systems: Used in public address systems where high output power and sound quality are required.
• Car Audio Systems: For amplifying signals in car audio amplifiers.
• Professional Sound Systems: In professional audio equipment like amplifiers for concert or studio use.

The STK681-320 is a high-performance audio power amplifier IC designed for applications requiring substantial output power, high efficiency, and excellent audio quality. It is ideal for use in various audio amplification systems where fidelity and power handling are critical.

Approx. Rs 200 / PieceGet Latest Price

Here’s a breakdown of the Toshiba 74VHC165 (also known as TC74VHC165F/FT/FK):

• An 8‑bit parallel‑in, serial‑out (PISO) shift register in the high‑speed VHC CMOS logic family .

• Accepts an 8‑bit parallel input, which can be loaded and then shifted out one bit at a time.

• Parallel load mode: Pull SH/LD low, then clock to synchronously load eight parallel inputs.

• Shift mode: Pull SH/LD high and apply clock pulses to shift data out serially via Qₕ.

• Includes gated clock input CK‑INH for flexible control 

• High‑speed (~150 MHz) performance while maintaining very low power consumption (~4 µA).

Toshiba's technology offers TTL-like speed in a CMOS form factor with low noise and power efficiency .

• Extending digital inputs for microcontrollers (e.g., reading buttons/switches via 3‑wire interface) .

• Daisy‑chainable shift registers for handling many inputs/outputs using minimal I/O lines.

• Fast digital signal sampling and serial data shifting in embedded systems.

The 74VHC165 is a fast, efficient, and versatile PISO shift register suited for microcontrollers and digital logic requiring expanded I/O with minimal pins. It combines high-speed performance with low quiescent current, making it ideal for power-efficient designs.

Would you like:

• The full datasheet (PDF)?

• Sample circuit diagrams or VHDL/Arduino usage code?

• Suggestions for pin-compatible alternatives (e.g., SN74VHC165 by TI, 74HC165 variants)?

Just let me know what you need next!

Approx. Rs 100 / PieceGet Latest Price

Here's an overview of the PZTA42 transistor from Philips (also manufactured by other vendors like ON Semiconductor, etc.):

• High-voltage switching

• Amplifiers

• Relay drivers

• General-purpose high-voltage linear and switching

Let me know if you need equivalents, PCB layout hints, or datasheet.

Approx. Rs 250 / PieceGet Latest Price

The FTR-F3AA012E is a slim power relay from Fujitsu's FTR-F3 series, designed for applications requiring compact size and reliable performance. This relay is suitable for use in household appliances, office equipment, and industrial devices.

Key Features:

• Compact Design: The relay features a slim profile, making it ideal for high-density mounting in space-constrained applications.

• High Insulation: Designed with a wide contact gap and high insulation resistance, ensuring reliable operation in various environments.

Specifications:

• Coil Voltage: 12 VDC

• Contact Configuration: SPST-NO (Single Pole Single Throw - Normally Open)

• Contact Rating: 3 A at 125 VAC or 30 VDC

• Coil Resistance: 720 Ω

• Operating Temperature Range: -40°C to +70°C

• Mounting Style: Through-hole for PCB mounting

• Contact Material: AgNi (Silver Nickel)

For detailed specifications and application guidelines, refer to the official datasheet provided by Fujitsu. The FTR-F3AA012E relay is available through authorized distributors such as Mouser Electronics. Availability and pricing may vary, so it's advisable to check their website for the most current information.

Approx. Rs 2,000 / PieceGet Latest Price

The SAF-C167CR-LM is a high-performance 16-bit microcontroller from Infineon Technologies, belonging to the C166 family. It is designed for embedded control applications, offering powerful computation, robust peripherals, and low power consumption. Below are its key specifications and features:

• Core: 16-bit C166 architecture with an advanced RISC-like design
• Clock Frequency: Up to 40 MHz
• Memory:
  • Program Memory: Typically, external memory is required (no internal Flash/ROM).
  • RAM: 2 KB of on-chip RAM
• I/O Ports:
  • 111 I/O lines (multiplexed with peripheral functions)
  • 16 multiplexed analog inputs (10-bit ADC)
• Interrupt System:
  • 16 priority levels
  • Multiple interrupt sources (up to 89)
• Timers:
  • 5 general-purpose timers
  • 2 multi-functional timer units for complex timing functions
• Serial Communication:
  • 2 synchronous/asynchronous serial interfaces
  • 1 high-speed SPI interface
• Watchdog Timer: For system reliability
• PWM Modules: For motor control or other PWM applications
• Operating Voltage: 5V
• Power Management: Idle and power-down modes for low-power operation

• P-LQFP-144 (Low-Profile Quad Flat Package with 144 pins)

• Automotive systems (engine control units, transmission control)
• Industrial automation
• Communication systems
• Embedded control systems
• Robotics

The SAF-C167CR-LM is valued for its reliability and robust performance in demanding embedded applications. Its rich set of peripherals and real-time capabilities make it a popular choice for automotive and industrial systems.

Would you like the datasheet, programming examples, or help with interfacing this IC?

Approx. Rs 2,500 / PieceGet Latest Price

The SAB-VECON-LM is a single-chip microcontroller developed by Infineon Technologies (formerly Siemens) for automotive applications. It features a 32-bit ARM Cortex-M3 processor core, offering a balance between performance and power efficiency. The microcontroller is housed in a QFP-160 package, suitable for automotive-grade applications. citeturn0search1

Key Specifications:

• Processor Core: 32-bit ARM Cortex-M3
• Flash Memory: Up to 128 KB
• RAM: Up to 8 KB
• Analog-to-Digital Converter (ADC): Up to 8 channels, 10-bit resolution
• Pulse-Width Modulation (PWM): Up to 5 channels
• Communication Interfaces: Integrated CAN controller
• Package Type: QFP-160

Features:

• Low Power Consumption: Designed for energy-efficient operation, making it suitable for automotive applications where power efficiency is crucial.
• Integrated Peripherals: Includes essential peripherals such as ADCs, PWMs, and communication interfaces, reducing the need for external components.
• Automotive Grade: Built to meet the stringent requirements of automotive applications, ensuring reliability and durability in harsh environments.

Applications:

• Engine Control Units (ECUs): Ideal for managing engine functions, optimizing performance and fuel efficiency.
• Body Electronics: Suitable for controlling lighting, window mechanisms, and other body-related functions.
• Powertrain Control: Effective in managing transmission systems and other powertrain components.

For detailed technical information, including electrical characteristics, timing diagrams, and application guidelines, please refer to the SAB-VECON-LM datasheet. citeturn0search3

If you require further assistance with integrating the SAB-VECON-LM into your design or have specific questions regarding its operation, feel free to ask!

Approx. Rs 100 / PieceGet Latest Price

The STN3NF06 is an N-channel MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) from STMicroelectronics, designed for use in switching applications where efficient control of electrical current is required. This MOSFET is part of the STN series, offering good performance in both low- and high-voltage environments.

• Type: N-channel MOSFET
• Drain-Source Voltage (Vds): 60V, which means it can withstand up to 60V between the drain and source terminals.
• Continuous Drain Current (Id): Typically 3A (at 25°C), which indicates the maximum continuous current the device can handle without overheating.
• Rds(on) (Drain-Source On Resistance): 100mΩ (at Vgs = 10V), which represents the resistance between the drain and source when the MOSFET is fully turned on. A lower Rds(on) means lower power loss and heat generation during operation.
• Gate Threshold Voltage (Vgs(th)): Typically between 1V to 3V, indicating the voltage required at the gate to start turning the MOSFET on.
• Package Type: TO-220, which provides a good balance between power dissipation and ease of mounting on a heatsink.
• Gate Drive Voltage: Optimized for 5V to 10V gate drive, commonly used for logic-level control.
• Operating Temperature: Typically -55°C to +150°C, making it suitable for a wide range of industrial and automotive applications.

• Low On-Resistance: The 100mΩ Rds(on) allows for efficient switching with minimal power loss, making it ideal for power electronics applications.
• Fast Switching: Designed for high-speed switching applications, making it useful for pulse-width modulation (PWM) circuits, motor control, and power supplies.
• Low Gate Charge: The device has a low gate charge, which means it requires less energy to switch on and off, reducing switching losses in high-frequency circuits.
• Thermal Stability: With an operating temperature range of -55°C to +150°C, the STN3NF06 is well-suited for high-temperature environments.
• Avalanche Energy Capability: This MOSFET is capable of withstanding avalanche conditions, adding reliability to circuits that experience transient voltage spikes.

• Power Supplies: Used in DC-DC converters, AC-DC rectifiers, and other power management systems.
• Motor Control: Ideal for controlling the power supplied to motors in applications such as drives, pumps, or fans.
• Switching Regulators: Used in both buck and boost converters for efficient voltage conversion.
• LED Drivers: Often used in circuits designed to drive LEDs efficiently, especially in dimming or constant current regulation applications.
• Automotive: Suitable for automotive power systems where efficient switching and high reliability are essential, especially in DC-DC converters or battery management systems.
• Industrial Equipment: Used in industrial control circuits for switching or power regulation tasks, including heating elements, solenoids, or power relays.

The STN3NF06 is a versatile, reliable N-channel MOSFET suitable for a variety of power management applications, offering excellent switching performance, low power dissipation, and robust thermal stability.

If you'd like more details on its characteristics or design examples, let me know!

Approx. Rs 1,750 / PieceGet Latest Price

The SAF-C165-LM is a high-performance 16-bit single-chip microcontroller from Infineon's C165 family, designed for cost-sensitive applications requiring efficient processing and peripheral integration.

Key Specifications:

• CPU Performance: Up to 12.5 million instructions per second (MIPS) at a 20 MHz clock frequency.
• Instruction Cycle Time: 100 ns at 20 MHz CPU clock.
• On-Chip Memory:
  • 2 KB RAM.
  • 4 KB ROM (for ROM variants).
• Address Space: Up to 16 MB linear address space for code and data.
• External Bus Interface: Supports 8-bit or 16-bit external data bus with programmable characteristics.
• Timers: Two multi-functional general-purpose timer units with five timers.
• Serial Communication: Two serial channels (synchronous/asynchronous and high-speed synchronous).
• Interrupt System: 16 priority levels with 28 sources.
• Power Management: Idle and power-down modes for energy efficiency.

Package Options:

• SAF-C165-LM: 20 MHz, 4.5 to 5.5 V, MQFP-100.
• SAF-C165-L25M: 25 MHz, 4.5 to 5.5 V, MQFP-100.
• SAF-C165-LF: 20 MHz, 4.5 to 5.5 V, TQFP-100.
• SAF-C165-L25F: 25 MHz, 4.5 to 5.5 V, TQFP-100.
• SAF-C165-LM3V: 20 MHz, 3.0 to 3.6 V, MQFP-100.
• SAF-C165-LF3V: 20 MHz, 3.0 to 3.6 V, TQFP-100.

Features:

• High-Speed Processing: Achieves efficient execution of complex instructions with a 4-stage pipeline architecture.
• Enhanced Bit Manipulation: Provides advanced Boolean bit manipulation facilities for efficient control operations.
• Flexible Bus Interface: Offers programmable external bus characteristics, including 8-bit or 16-bit data bus and multiplexed or demultiplexed address/data buses.
• Integrated Peripherals: Includes timers, serial communication interfaces, and a programmable watchdog timer.
• Low Power Consumption: Features idle and power-down modes to reduce power consumption in low-activity states.

Applications:

• Industrial Control Systems: Suitable for automation and control applications requiring reliable processing and peripheral integration.
• Automotive Electronics: Ideal for engine control units, body control modules, and other automotive applications.
• Consumer Electronics: Applicable in devices requiring efficient processing with integrated peripherals.
• Communication Systems: Suitable for applications involving data transmission and reception.

For detailed technical information, including electrical characteristics, thermal management, and application guidelines, please refer to the SAF-C165-LM datasheet. citeturn0search0

If you require further assistance with integrating the SAF-C165-LM into your design or have specific questions regarding its operation, feel free to ask!