Mosfet Transistor

Approx. Rs 250 / PieceGet Latest Price

he PQ12RH11 is a low power-loss voltage regulator designed to provide a fixed 12V output with a maximum current of 1.5A.anufactured by Sharp Corporation, it is housed in a TO-220 package, which is commonly used for power semiconductor devices.citeturn0search0 Key Specifications:

• Output Voltage: 2V- Maximum Output Current: .5A- Dropout Voltage: aximum of 0.5V- Overheat Protection: es- Package Type: O-220 he PQ12RH11 features low power loss, making it suitable for applications where energy efficiency is important.t also includes overheat protection to safeguard the device during operation.citeturn0search0 For detailed technical information, you can refer to the datasheet available at: citeturn0search0

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 750 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 3,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 450 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 300 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: Radhe Krishna components, we have huge stock of hard to find original products with over 10000+ parts ready available for immediate dispatch.

Approx. Rs 3,200 / PieceGet Latest Price

The FS25R12W1T4 is an IGBT module manufactured by Infineon Technologies. It belongs to Infineon's FREDF (Fast Recovery Emitter Controlled Diode) series and is designed for efficient power switching applications in industrial systems.

• Type: IGBT Module (Insulated Gate Bipolar Transistor)
• Voltage Rating: 1200 V (Collector-Emitter Voltage, Vce)
• Current Rating: 25 A (Continuous Collector Current, Ic)
• Package Type: FZ-4 (a 4-pin configuration with a compact design for high-power applications)
• Switching Frequency: Designed to handle high-speed switching applications, providing a balance between high current capacity and fast switching capabilities.
• Built-in Diodes: Integrated freewheeling diodes (anti-parallel diodes) to allow current to flow when the IGBT is off, providing complete control over current in the system.
• Low Saturation Voltage: Features a low Vce(sat) (collector-emitter saturation voltage), which helps reduce power losses during switching.
• High Efficiency: The module is optimized for low switching losses and high efficiency, making it ideal for energy-saving applications.
• Thermal Management: The module is designed with high thermal conductivity to efficiently dissipate heat, which is critical for reliable operation in

1. High Voltage and Current Handling: The FS25R12W1T4 can handle 1200 V and 25 A currents, making it suitable for industrial applications requiring high power and voltage control.
2. Low Switching Losses: The module is optimized for fast switching, reducing switching losses and improving overall efficiency in power conversion systems.
3. Integrated Protection: The FREDF series design includes protections such as overvoltage, overcurrent, and thermal protection, increasing reliability and extending the lifespan of the module

• Motor Control: Ideal for use in motor drives, such as in AC induction motors, DC motors, and permanent magnet motors in industrial applications.
• Inverters: Widely used in inverters, including solar inverters, wind energy inverters, and UPS (uninterruptible power supply) systems, where efficient DC-AC conversion is required.
• Welding Equipment: Suitable for high-power welding machines, where precise control of current and voltage is essential for welding operations.
• Power Conversion: Used in DC-DC and AC-DC power converters, where high efficiency, fast switching, and voltage regulation are needed.

The FS25R12W1T4 module's thermal performance is critical to ensuring reliable operation at high currents and voltages. Adequate heat dissipation, typically through heat sinks or forced air cooling, is necessary to maintain safe operating temperatures.

When integrating the FS25R12W1T4 IGBT module into a circuit, the following aspects should be considered:

• Gate Drive Circuit: Ensure proper gate drive circuitry for efficient switching and to prevent excessive switching losses.
• Snubber Circuit: A snubber circuit may be required to absorb voltage spikes caused by inductive loads.
• Cooling: Depending on the application, ensure adequate thermal management to prevent the IGBT module from overheating during operation.

Would you like more detailed information on the datasheet, thermal management guidelines, or application circuits for the FS25R12W1T4 IGBT module?

Approx. Rs 300 / PieceGet Latest Price

The SIR880DP is a Power MOSFET manufactured by Vishay, designed for high-efficiency, high-performance switching applications. It is a N-channel MOSFET, typically used in power conversion, motor control, and other systems requiring fast switching and low on-resistance.

• Type: N-channel MOSFET
• Voltage Rating: 80 V (drain-to-source voltage, Vds)
• Current Rating: 80 A (continuous drain current at 25°C)
• On-Resistance (Rds(on)): 9.6 mΩ (at Vgs = 10 V, which contributes to low conduction losses and high efficiency)
• Gate Threshold Voltage (Vgs(th)): Typically between 1.0 V and 3.0 V.
• Package Type: D2PAK (TO-263), which is a popular surface-mount package that provides good thermal dissipation and is suitable for high-current applications.
• Low Gate Charge: The MOSFET is designed to have a low gate charge, which helps improve switching efficiency, especially in high-speed applications.

1. Low Rds(on): The low on-resistance minimizes conduction losses, improving efficiency and reducing heat generation during operation.
2. High Current Handling: With an 80 A continuous drain current rating, it is capable of handling substantial loads, making it suitable for power supplies, motor controllers, and similar high-power applications.
3. Fast Switching: The MOSFET's low gate charge and high switching speed make it well-suited for applications where high-speed switching is required.
4. Thermal Performance: The D2PAK package provides efficient heat dissipation, allowing for reliable performance in power-hungry systems.
5. High Voltage Capability: The 80 V voltage rating allows it to be used in medium-voltage systems, making it versatile for various applications.

• DC-DC Converters: Used in power supply circuits for efficient voltage conversion.
• Motor Drives: Powering electric motors in industrial and automotive applications.
• Switching Regulators: Efficient voltage regulation in battery-powered devices and electronic systems.
• Power Management: Used in devices like computers, industrial controls, and consumer electronics to manage power conversion and distribution.
• Inverters: Used in solar power inverters and other power conversion systems.

This MOSFET is particularly suitable for high-efficiency power supplies, motor control, and power conversion systems that require low power loss and efficient switching.

Would you like more details about the datasheet or example circuits using the SIR880DP MOSFET?

Approx. Rs 225 / PieceGet Latest Price

The IKP20N60T is an Insulated Gate Bipolar Transistor (IGBT) produced by Infineon Technologies. It is designed for high-voltage power switching applications, typically in industrial and consumer electronics.

Here are the key details about the IKP20N60T:

• Type: IGBT (Insulated Gate Bipolar Transistor)
• Package: The IKP20N60T is typically available in a TO-220 package, which is commonly used for high-power semiconductor devices.
• Voltage Rating: The IKP20N60T has a collector-emitter voltage (Vce) rating of 600V, which allows it to be used in high-voltage applications.
• Current Rating: It is capable of handling a continuous collector current of 20A, making it suitable for medium to high-power switching applications.
• Switching Characteristics: The IGBT features a fast switching speed, providing efficient switching and low switching losses. This makes it suitable for applications where fast and reliable switching is required.

• High Voltage Capability: The 600V rating makes it ideal for applications where voltage spikes or high-voltage power conversion is common, such as in motor drives, inverters, and power supplies.
• Low Saturation Voltage (Vce(sat)): The IGBT has a low saturation voltage, which helps to minimize power dissipation during operation.
• Thermal Stability: The IKP20N60T features good thermal stability, meaning it can handle high currents and voltages without excessive heating, ensuring reliable operation in demanding environments.
• Gate Drive: Like most IGBTs, it requires a gate driver to switch the device on and off efficiently. It can be controlled with low gate drive voltage and can be used with either positive or negative gate drive circuits.
• Short Circuit and Overload Protection: The device is designed to withstand short-circuit and overload conditions, making it more robust and reliable in real-world applications.

• Motor Control: It is commonly used in motor drives, particularly for induction motors and permanent magnet motors, due to its high-voltage handling and switching capabilities.
• Inverters: The IKP20N60T is used in DC-AC inverters for solar power systems, UPS (uninterruptible power supplies), and electric vehicle chargers.
• Power Supplies: It can be used in switched-mode power supplies (SMPS) and DC-DC converters for efficient power conversion and regulation.
• Induction Heating: It is also found in induction heating systems, where high power and fast switching are essential for heating applications.
• Welding Equipment: The IKP20N60T is used in welding machines and laser systems, where high current and voltage capabilities are required for stable operation.

The IKP20N60T IGBT from Infineon is an efficient, reliable, and high-performance device ideal for medium-to-high-power applications, providing excellent voltage handling, fast switching, and robustness in industrial power control systems.

Approx. Rs 800 / PieceGet Latest Price

The TLE7230G is an integrated circuit (IC) produced by Infineon Technologies, a leading company in the development of power management and semiconductor solutions.

Here are the key details about the TLE7230G:

• Type: High-Current Power Driver IC

• Package: Typically comes in a PG-DSO-20 or 20-pin SSO-20 (Small Signal Outline) package.

• Function: The TLE7230G is a high-current, low-side driver designed for use in motor control and actuator drive applications. It includes integrated H-Bridge circuits that allow it to control both the direction and speed of motors.

• Current Handling: It is capable of driving motors or actuators that require high current, with short-circuit protection and thermal shutdown to ensure safe operation.

• Voltage Rating: It operates in a voltage range of 5V to 28V, suitable for automotive and industrial applications.

• Features:

  • Multiple Outputs: The TLE7230G has multiple output channels, capable of controlling several brushless DC motors, stepper motors, or solenoids.
  • Protection Features: The IC integrates overtemperature protection, overcurrent protection, and undervoltage lockout, ensuring reliable performance in demanding environments.
  • Control Inputs: It typically uses digital control signals (such as PWM or logic-level inputs) to operate the outputs.

• Applications:

  • Automotive: The TLE7230G is often used in automotive applications such as electric seat control, window lift systems, fan controllers, and automated sunroof mechanisms.
  • Industrial: It is also suitable for industrial systems requiring high-current control, like robotic actuators, motorized valves, and other high-power actuator control applications.

This IC is designed to provide efficient and reliable motor and actuator control, making it well-suited for automotive and industrial systems that require robust and precise power management.

Approx. Rs 225 / PieceGet Latest Price

The FGL60N100BNTD is a N-channel MOSFET from Fairchild Semiconductor (now part of ON Semiconductor). It is designed for high-voltage switching and power conversion applications, offering excellent efficiency and performance in demanding power electronics circuits.

• Type: N-channel MOSFET
• Drain-Source Voltage (Vds): 1000V (high voltage rating, making it suitable for industrial and high-power applications)
• Continuous Drain Current (Id): 60A (at 25°C, depending on thermal conditions)
• Gate-Source Voltage (Vgs): ±20V (maximum gate voltage for safe operation)
• On-Resistance (Rds(on)): Typically low (in the milliohm range), ensuring minimal conduction loss and heat generation during operation
• Gate Threshold Voltage (Vgs(th)): Typically in the range of 2.0V to 4.0V
• Total Gate Charge (Qg): Low total gate charge, which reduces switching losses and enables fast switching performance

• High Voltage Rating: Rated for 1000V, ideal for high-voltage applications like power supplies, motor control, and industrial systems.
• Low On-Resistance: Ensures minimal power loss and heat generation, providing high efficiency during conduction.
• Fast Switching: Designed for high-speed switching applications, allowing for efficient switching at high frequencies.
• Thermal Management: Capable of handling substantial power dissipation with proper thermal management (typically used with heatsinks in high-power designs).
• Low Gate Drive Requirements: Designed to work with low gate voltages, which helps reduce the power required to drive the MOSFET.

• Power Supplies: Suitable for use in high-efficiency switch-mode power supplies (SMPS) and inverters.
• Motor Control: Can be used for efficient switching in motor control circuits.
• DC-DC Converters: Ideal for high-voltage DC-DC conversion applications where efficiency is crucial.
• HVDC Systems: Used in systems that require high-voltage direct current conversion or switching.
• Industrial Equipment: Suitable for a wide range of industrial and commercial applications requiring high voltage and current switching.

The FGL60N100BNTD is a powerful and efficient MOSFET designed to handle high-voltage switching applications, with low power dissipation and excellent performance in power electronics.

If you need help with specific circuit designs or further details on its use, feel free to ask!

Approx. Rs 250 / PieceGet Latest Price

The WMJ53N60C4 is a N-channel MOSFET from Wayon Semiconductor, designed for high-voltage and power switching applications. It is typically used in circuits requiring high efficiency and minimal power loss, such as in switching power supplies, motor control, and DC-DC converters.

• Type: N-channel MOSFET
• Drain-Source Voltage (Vds): 600V (maximum)
• Continuous Drain Current (Id): 53A (at 25°C, depending on cooling conditions)
• Gate Threshold Voltage (Vgs(th)): Typically 2.0V to 4.0V
• On-Resistance (Rds(on)): Low, typically in the milliohm range, ensuring minimal conduction losses during operation
• Gate-Source Voltage (Vgs): ±20V (maximum)
• Package Type: Typically available in a TO-220 or similar package for heat dissipation

• High Voltage Rating: 600V Vds, making it suitable for applications with significant voltage requirements.
• Low On-Resistance: This reduces power loss and heat generation, which is crucial for efficiency.
• Fast Switching: Suitable for high-frequency switching applications.
• Thermal Stability: Designed to handle high power levels with adequate thermal management.
• Easy to Drive: Requires relatively low gate drive voltage to fully turn on, typical for MOSFETs.

• Power Supplies: Used in high-efficiency DC-DC converters, switch-mode power supplies (SMPS), and inverters.
• Motor Drives: Can be used for controlling motors with high efficiency.
• LED Drivers: Often used in circuits requiring efficient and high-voltage power management.
• Switching Circuits: Ideal for switching large voltages and currents in industrial and consumer electronics.

The WMJ53N60C4 is a great choice for power applications requiring high voltage and high current, coupled with low on-resistance for energy efficiency.

Let me know if you need more detailed circuit examples or further assistance!

Approx. Rs 7,500 / PieceGet Latest Price

The PS11017 is an Intelligent Power Module (IPM) developed by Mitsubishi Electric, designed to facilitate efficient and reliable motor control in industrial applications. This module integrates a 3-phase IGBT inverter bridge, along with comprehensive drive and protection circuits, streamlining the design of motor control systems.

Key Features:

• 3-Phase IGBT Inverter Bridge: Incorporates the latest 3rd generation IGBT and diode technologies, ensuring high efficiency and performance.

• Integrated Dynamic Braking Circuit: Manages motor regenerative energy, enhancing system safety and reliability.

• Comprehensive Protection Functions:

  • Short-Circuit Protection (SC): Safeguards against overcurrent conditions.
  • Under-Voltage (UV) and Over-Voltage (OV) Protection: Monitors and maintains appropriate voltage levels.
  • Over-Temperature Protection (OT): Prevents thermal overload, ensuring longevity.
  • Fault Output (FO) Signaling: Provides diagnostic feedback for system monitoring.

• Single Power Supply Operation: Utilizes a bootstrap circuit supply scheme, simplifying power requirements.

• 5V CMOS/TTL Compatible Inputs: Facilitates easy interfacing with control systems.

Applications:

• Motor Control: Ideal for driving 3.7kW/AC200V class 3-phase motors in industrial settings.

• Inverter Systems: Suitable for various inverter applications requiring efficient power management.

Technical Specifications:

• Collector-Emitter Voltage (VCES): 600V

• Collector Current (IC): 30A

• Isolation Voltage: 2500V RMS

• Package Type: Insulated Type

For detailed technical information, including electrical characteristics, thermal management, and application guidelines, please refer to the PS11017 datasheet. citeturn0search0

If you require further assistance with integrating the PS11017 into your design or have specific questions regarding its operation, feel free to ask!

Approx. Rs 350 / PieceGet Latest Price

The OPA4354A is a precision operational amplifier (op-amp) from Texas Instruments. It is part of the OPA435x series, known for its low power consumption, low offset voltage, and high precision. The OPA4354A is typically used in high-performance analog signal processing applications where low noise, high accuracy, and low drift are crucial.

• Type: Precision Operational Amplifier (Op-Amp)
• Package Type: SMD (Surface Mount Device), typically found in SOIC-8, VSSOP-8, or similar packages, making it suitable for compact designs.
• Supply Voltage: Operates with a wide supply voltage range of ±2.25V to ±18V or 4.5V to 36V (single supply), offering flexibility for various applications.
• Bandwidth (Unity Gain): Typically 8 MHz, which is good for many precision signal processing applications.
• Low Input Offset Voltage: Typically 25 µV, ensuring that the amplifier’s output is highly accurate with minimal offset.
• Low Input Bias Current: Typically 0.01 nA, reducing errors in precision measurements.
• Low Total Harmonic Distortion (THD): This op-amp features low harmonic distortion, which makes it suitable for audio and high-fidelity applications.
• Low Noise: The op-amp has a low noise density of 1.2 nV/√Hz at 1 kHz, making it ideal for applications requiring minimal noise.
• Rail-to-Rail Output: The OPA4354A offers rail-to-rail output, meaning it can drive the output signal close to the supply rails, making it ideal for low-voltage systems.
• Low Power Consumption: Designed for low power operation, consuming only 0.1 mA (typical), which is useful in battery-powered and energy-efficient applications.
• Output Swing: Can swing close to the supply rails, typically within 50 mV of the rails under a 1 kΩ load, allowing for efficient signal processing in low-voltage systems.

• High Precision: Offers low offset voltage, low drift, and low input bias current, ensuring high accuracy in signal conditioning and processing applications.
• Low Power: With a typical quiescent current of 0.1 mA, the OPA4354A is energy-efficient, making it suitable for battery-operated devices and low-power systems.
• Low Noise: The low noise density makes it suitable for audio, instrumentation, and other precision analog applications where signal integrity is essential.

The OPA4354A is used in a variety of precision signal processing and low-power applications, including:

• Audio Signal Processing: Its low noise and low distortion characteristics make it ideal for audio preamps and signal conditioning.
• Sensor Signal Conditioning: For use with sensors where high accuracy and low noise are required, such as in industrial control systems, medical equipment, and measurement instruments.

The OPA4354A is a precision, low-power operational amplifier that excels in applications requiring high accuracy, low noise, and efficient performance. Its wide supply voltage range, low offset, and rail-to-rail output make it ideal for portable, battery-powered, and precision analog systems.

Approx. Rs 450 / PieceGet Latest Price

The UCC3818 is an 8-pin Power Factor Correction (PFC) IC developed by Texas Instruments. It is designed for use in high-efficiency AC-to-DC converters to improve power factor and reduce harmonic distortion. Below are the key details about the IC:

1. Power Factor Correction (PFC):

   • Ensures near-unity power factor in power supplies.
   • Reduces harmonic distortion, making it suitable for meeting IEC 61000-3-2 compliance.

2. Continuous Conduction Mode (CCM):

   • Operates in CCM for better performance in medium-to-high power applications.

3. Fixed Switching Frequency:

   • Supports fixed switching frequency operation, simplifying design.

4. High Efficiency:

   • Designed for low total harmonic distortion (THD) and improved power efficiency.

5. Soft Start:

   • Features soft-start functionality to minimize inrush currents during startup.

6. Overvoltage and Overcurrent Protection:

   • Protects the system against voltage and current surges.

7. Wide Temperature Range:

   • Operates over an extended temperature range suitable for industrial environments.

• Power Supplies for Servers and Workstations
• High-Power Lighting Systems
• Industrial and Consumer Electronics
• Telecommunication Systems

The UCC3818 is typically available in an SOIC-8 (Small Outline Integrated Circuit) SMD package, ensuring ease of integration into PCB designs.

If you need the datasheet, design guidelines, or additional technical support, let me know!

Approx. Rs 850 / PieceGet Latest Price

The LT1413 is a precision operational amplifier (op-amp) manufactured by Linear Technology, now part of Analog Devices, Inc. This device is optimized for high performance and is typically used in applications requiring low offset voltage, low drift, and high-speed operation.

1. Type: Precision, single operational amplifier.
2. Operating Voltage:
   • Dual supply: ±2V to ±18V.
   • Single supply: 4V to 36V.
3. Input Offset Voltage: Typically 80µV, with low drift over temperature.
4. Input Bias Current: 250nA typical.
5. Gain Bandwidth Product: 1MHz.
6. Slew Rate: 0.4V/µs.
7. Output Drive Capability: Can source or sink up to 30mA.
8. Low Power Consumption: Typically 320µA supply current.
9. Package Types: Available in SMD packages such as SOIC or MSOP for compact designs.
10. Temperature Range:
    • Commercial: 0°C to 70°C.
    • Industrial: -40°C to 85°C.

• Low offset voltage and drift ensure precision performance.
• Wide supply voltage range supports flexibility in designs.
• Low supply current makes it suitable for battery-powered applications.
• Rail-to-rail output for maximizing dynamic range.

• Sensor signal conditioning.
• Precision instrumentation.
• Medical instrumentation.
• Data acquisition systems.
• Low-power portable devices.

For detailed electrical characteristics, pin configuration, and application circuits, refer to the LT1413 datasheet provided by Analog Devices. The datasheet includes typical applications and design notes to help integrate the IC into your project effectively.

Approx. Rs 60 / PieceGet Latest Price

he M74HC253B1 is a dual 4-channel multiplexer with 3-state outputs, designed for high-speed CMOS logic applications.anufactured by STMicroelectronics, it is housed in a 16-pin DIP package.citeturn0search2 Key Specifications:

• Supply Voltage (VCC): V to 6 V- Input Voltage Range: V to VCC- High-Level Output Current (IOH): 5.2 mA- Low-Level Output Current (IOL): .2 mA- Propagation Delay (tpd): pproximately 15 ns (at VCC = 5 V)- Operating Temperature Range: 55°C to 125°C he device features two independent 4-channel multiplexers with common select inputs (S0, S1) and individual enable inputs (1G, 2G).hen the enable input is low, one of the four inputs (nA, nB, nC, nD) is selected and transmitted to the output (nY) based on the select inputs. high level on the enable input forces the output into a high-impedance state, allowing for bus-oriented applications. he M74HC253B1 is suitable for applications requiring high-speed data routing and isolation, such as memory address selection, data distribution, and bus interfacing. For detailed technical information, you can refer to the datasheet available at: citeturn0search0

Approx. Rs 250 / PieceGet Latest Price

he TLP549J is a photocoupler manufactured by Toshiba, featuring an infrared emitting diode (IRED) optically coupled to a photo-thyristor within a seven-lead plastic DIP package.his configuration provides electrical isolation between the input and output, making it suitable for applications such as office machines, household equipment, solid-state relays, and switching power supplies.citeturn0search2 Key Features:

• Peak Off-State Voltage (VDRM): 00 V (minimum)- Trigger LED Current (IFT): mA (maximum)- On-State Current (IT): 50 mA (maximum)- Isolation Voltage (Viso): 500 Vrms (minimum)- Safety Standard Approval: L 1577 recognized (File No. E67349) Package Information:

• Package Type: -pin DIP8- Mounting: hrough-hole or detailed electrical characteristics, absolute maximum ratings, and application guidelines, please refer to the TLP549J datasheet. lease note that Toshiba has announced the end-of-life (EOL) status for the TLP549J.or more information and potential alternatives, visit Toshiba's official product page.citeturn0search0

Approx. Rs 250 / PieceGet Latest Price

The L6599 is a high-voltage resonant controller from STMicroelectronics, specifically designed for resonant half-bridge topologies. It provides a 50% complementary duty cycle, with the high-side and low-side switches driven 180° out-of-phase for equal durations. citeturn0search0

Key Features:

• Variable Frequency Control: Regulates output voltage by modulating the operating frequency.

• Fixed Dead-Time: Ensures soft-switching and enables high-frequency operation by inserting a fixed dead-time between the turn-off of one switch and the turn-on of the other.

• Integrated High-Voltage Floating Structure: Withstands more than 600 V, incorporating a synchronous-driven high-voltage DMOS to replace the external fast-recovery bootstrap diode.

• High-Accuracy Oscillator: Allows designers to set the operating frequency range of the converter through an externally programmable oscillator.

• Non-Linear Soft-Start: Prevents uncontrolled inrush current at start-up by initiating switching from a programmable maximum frequency, which progressively decreases to the steady-state value determined by the control loop.

• Burst-Mode Operation: At light loads, the IC can enter a controlled burst-mode operation to minimize input consumption.

• Two-Level Overcurrent Protection (OCP): Combines frequency-shift and latched shutdown to offer comprehensive protection against overload and short circuits.

• Latched Disable Input: Facilitates easy implementation of over-temperature protection (OTP) and/or over-voltage protection (OVP).

• PFC Controller Interface: Provides an interface to switch off the pre-regulator during fault conditions or burst-mode operation.

Applications:

The L6599 is suitable for various applications, including:

• Switch-mode power supplies

• Industrial power systems

• Consumer electronics

• Lighting systems

For detailed specifications and application guidelines, please refer to the 

Approx. Rs 650 / PieceGet Latest Price

The TE28F160S570 is a 16-megabit (Mb) Flash memory device from Intel's FlashFile™ family, designed for high-performance and reliable non-volatile storage applications. This memory is organized as 2 megabytes (MB) and features a 70-nanosecond (ns) access time, ensuring swift data retrieval.

Key Features:

• Density: 16 Mb (2 MB)
• Access Time: 70 ns
• Supply Voltage: Operates at a single 5V supply
• Package: 56-pin TSOP (Thin Small Outline Package)
• Operating Temperature Range: -40°C to +85°C, suitable for industrial applications
• Endurance: 100,000 program/erase cycles
• Data Retention: 10 years

This Flash memory is ideal for applications requiring reliable and fast non-volatile storage, such as embedded systems, industrial controls, and consumer electronics.

For detailed electrical characteristics, timing diagrams, and application guidelines, please refer to the TE28F160S5-70 datasheet.

If you're looking to purchase the TE28F160S570, it's available through various distributors. For example, Jotrin Electronics offers this component. Please note that availability and pricing may vary based on your location and the distributor.

Approx. Rs 1,800 / PieceGet Latest Price

The UC3625Q is a high-performance Brushless DC Motor Controller IC from Unitrode (now part of Texas Instruments). It’s designed to drive 3-phase brushless DC (BLDC) motors using Hall sensor inputs for rotor position feedback.

✅ Motor Type: 3-phase brushless DC motor
✅ Supply Voltage: 10V to 20V
✅ Output Current: ±100mA
✅ Hall Sensor Inputs: Three differential inputs for rotor position detection
✅ PWM Control: Internal pulse-width modulation
✅ Direction Control: Built-in logic for forward/reverse rotation
✅ Commutation Logic: 120° and 60° electrical phase inputs
✅ Protection Features:

• Overcurrent protection (OCP)
• Thermal shutdown (OTP)
• Undervoltage lockout (UVLO)
  ✅ Selectable PWM Frequency: Adjustable with external resistor/capacitor

• Q: Indicates a PLCC-28 package (Plastic Leaded Chip Carrier)
• Surface Mount Device (SMD)

• BLDC motor control for industrial automation
• Robotics and servo motors
• HVAC systems
• Automotive motor control

Would you like the datasheet or more details on the pinout or circuit design? 

Approx. Rs 650 / PieceGet Latest Price

The UCC2817N is a BiCMOS power factor correction (PFC) controller originally developed by Unitrode, now part of Texas Instruments. This integrated circuit is designed to control boost preregulators, achieving near-unity power factor by shaping the AC input line current to match the AC input line voltage. It employs average current mode control to maintain stable, low-distortion sinusoidal line current. citeturn0search0

Key Features:

• Boost Preregulator Control: Shapes AC input current to achieve near-unity power factor.

• Low Start-Up Current: Typical start-up current of 150 µA.

• Wide Frequency Range: Operates from 6 kHz to 220 kHz.

• Over-Voltage Protection: Safeguards against voltage spikes.

• Accurate Power Limiting: Ensures consistent performance under varying conditions.

• Leading-Edge Modulation: Reduces ripple current in the bulk capacitor.

• Low-Power BiCMOS Operation: Enhances efficiency and reduces power dissipation.

The UCC2817N is available in a 16-pin PDIP package, suitable for through-hole mounting. citeturn0search6

Please note that the UCC2817N has been marked as obsolete and is no longer in production. Texas Instruments recommends the UCC28180DR as a potential substitute. citeturn0search2

For detailed specifications and application guidelines, please refer to the UCC2817N datasheet.

Approx. Rs 450 / PieceGet Latest Price

The K40MCS7 marking corresponds to Infineon's IKW40N120CS7, a 1200 V, 40 A insulated-gate bipolar transistor (IGBT) co-packed with a soft, fast recovery emitter-controlled 7 diode. citeturn0search1

Key Features:

• High Voltage and Current Ratings: Capable of withstanding voltages up to 1200 V and delivering a continuous collector current of 40 A.

• Low Saturation Voltage: Exhibits a collector-emitter saturation voltage (VCE(sat)) of 2.0 V at a junction temperature (Tvj) of 175°C, enhancing efficiency.

• Short-Circuit Ruggedness: Designed to withstand short-circuit events up to 8 microseconds, ensuring robust performance in fault conditions.

• Optimized for Hard Switching Topologies: Ideal for applications such as 2-level inverters and 3-level neutral-point-clamped (NPC) T-type inverters.

• Wide dv/dt Controllability: Offers flexibility in managing voltage rise rates, beneficial in various switching scenarios.

Applications:

• Industrial Motor Drives: Provides efficient and reliable operation in controlling industrial motors.

• Renewable Energy Systems: Suitable for use in solar inverters and wind turbine converters.

• Uninterruptible Power Supplies (UPS): Ensures consistent power delivery and system reliability.

For comprehensive specifications and application guidelines, please refer to the IKW40N120CS7 datasheet.

Approx. Rs 350 / PieceGet Latest Price

The UCC27322DGNR is a high-speed low-side gate driver IC manufactured by Texas Instruments. It’s commonly used to drive power MOSFETs and IGBTs in switching applications like power supplies, motor drivers, and DC-DC converters.

• Type: Dual Low-Side MOSFET Driver

• Channels: 2 independent drivers

• Peak Drive Current: 4 A (source) / 4 A (sink)

• Input Type: TTL/CMOS compatible

• Propagation Delay: ~25 ns (typical)

• Supply Voltage (VDD): 4.5 V to 15 V

• Logic Input Threshold: Compatible with 3.3 V and 5 V logic

• Output Stage: Push-pull (can both source and sink current)

• Package Type: SMD – MSOP-8 (DGNR)

• Mounting: Surface Mount

• Thermal Pad: Yes, exposed pad for heat dissipation

• Synchronous Buck Converters

• Class-D Audio Amplifiers

• Motor Drivers

• DC-DC Converters

• Power Factor Correction (PFC)

Would you like the datasheet or suggestions for alternative parts?

Approx. Rs 250 / PieceGet Latest Price

The SPW20N60C3 is an N-Channel Power MOSFET from Infineon Technologies, part of their CoolMOS™ series. This component is designed for high-voltage applications requiring efficient switching performance.

Key Specifications:

• Drain-Source Voltage (VDS): 600V

• Continuous Drain Current (ID): 13.1A

• On-State Resistance (RDS(on)): 0.19Ω

• Power Dissipation: 208W

• Package: TO-247AC (PG-TO247-3)

Features:

• Low specific on-state resistance

• Very low energy storage in output capacitance

• Low gate charge

• High efficiency and power density

• Suitable for high-performance applications

Applications:

• Power supplies

• Motor control

• Lighting systems

For detailed technical information, you can refer to the SPW20N60C3 Datasheet.

Please note that the SPW20N60C3 has been succeeded by the CoolMOS™ P7 series, which offers improved performance characteristics.

Approx. Rs 350 / PieceGet Latest Price

The TOP244R is an integrated off-line switcher from Power Integrations, part of the TOPSwitch-GX family. It combines a high-voltage power MOSFET with PWM control and fault protection circuitry into a single CMOS chip, simplifying the design of flyback power converters. citeturn0search2

Key Features:

• Extended Power Range: Delivers up to 50W from a 230V AC input or 28W from an 85-265V AC input without a heatsink. citeturn0search2

• EcoSmart™ Technology: Enhances energy efficiency with low standby power consumption. citeturn0search2

• Integrated Protection: Includes features like over-temperature, over-voltage, and current limiting protections. citeturn0search2

• Design Flexibility: Offers programmable switching frequency and external current limit settings. citeturn0search2

Package Type:

• TO-263-7C (D²PAK-7C): Suitable for surface-mount applications. citeturn0search3

Applications:

• Power supplies for set-top boxes, DVD players, and other consumer electronics.

• Auxiliary power supplies in PCs and servers.

• Industrial control systems.

Obsolescence Notice:

The TOP244R is not recommended for new designs. For current projects, consider alternative solutions from Power Integrations' latest product offerings. citeturn0search3

For more detailed information, refer to the TOPSwitch-GX Family Datasheet.

Approx. Rs 250 / PieceGet Latest Price

The FDPF3860T is an N-Channel Power MOSFET developed by Fairchild Semiconductor (now part of onsemi), utilizing advanced PowerTrench® technology. This design minimizes on-state resistance while maintaining superior switching performance, making it suitable for various power management applications.

• Drain-to-Source Voltage (VDSS):100 

• Continuous Drain Current (ID):20 A @ 25 °

• RDS(on):29.1 mΩ (typical) @ VGS = 10 V, ID = 5.9 

• Gate Charge (Qg):35 nC @ VGS = 10 

• Input Capacitance (Ciss):1800 pF @ VDS = 25 

• Maximum Power Dissipation:33.8 

• Package:TO-220F (fully isolated

For detailed technical specifications, you can refer to the datashee:
👉 FDPF3860T Datasheet (PDF)

For new designs, consider the following alterntives:

• FDPF390N5A: An N-Channel Power MOSFET with higher voltage and current ratings, suitable for more demanding applictions.

• FDPF3325: Offers a balance between voltage rating and on-resistance, making it a versatile choice for various power applictios.

Please note that these are not direct drop-in replacements; circuit modifications may be necssary.

If you need assistance in selecting a suitable replacement or sourcing this component, feel free to ask!

Approx. Rs 200 / PieceGet Latest Price

The IR2101 is a high-voltage, high-speed power MOSFET and IGBT driver designed by International Rectifier (IR), now part of Infineon Technologies. It is available in SMD (Surface Mount Device) and through-hole packages. Here's a detailed overview:

• Type: High- and low-side MOSFET driver

• Voltage Rating: Up to 600V

• Driver Configuration: Half-bridge driver

• Logic Input Compatibility: CMOS and TTL compatible

• Output Current: 120 mA source / 250 mA sink (typical)

• Propagation Delay: ~120 ns typical

• Dead Time: Programmable

• Built-in Features:

  • Undervoltage lockout (UVLO)

  • Shoot-through protection

  • Bootstrap operation for high-side driver

• Switching power supplies

• Motor drivers (DC and BLDC)

• Class D audio amplifiers

• DC-DC converters

• UPS and inverters

1. LO – Low-side output

2. COM – Low-side return

3. VCC – Logic power supply

4. IN – Input signal

5. SD – Shutdown (active low)

6. VB – High-side floating supply

7. HO – High-side output

8. VS – High-side return (floating)

1. Would you like the datasheet, recommended PCB footprint, or design example using the IR2101?

Approx. Rs 425 / PieceGet Latest Price

The L6506 is a dual full-bridge driver IC made by STMicroelectronics, primarily designed for bipolar stepper motor control. It serves as a controller for power stages (typically used with external MOSFETs or BJTs), allowing precise and efficient driving of stepper motors.

• Function: Bipolar stepper motor controller (dual full-bridge)

• Type: PWM current controller for stepper motors

• Technology: Bipolar/CMOS compatible

• Manufacturer: STMicroelectronics

• Control Logic: Compatible with step/direction or phase inputs

• Output Type: Logic-level control for external drivers (not integrated power output stage)

• Controls 2 full bridges (ideal for bipolar stepper motors)

• Independent PWM current control for each bridge

• Chopper control mode (for current regulation)

• Adjustable fast/slow decay

• Synchronized or independent PWM

• Cross-conduction protection

• Compatible with L298 or other dual H-bridge power drivers

• Bipolar stepper motor drivers

• CNC controllers

• 3D printers

• Robotics and automation

• Industrial motor control

• Often paired with L298, a dual H-bridge power driver IC.

  • L6506 provides logic and PWM control.

  • L298 handles actual motor currents.

Would you like a datasheet, example circuit (e.g. L6506 + L298), or simulation model for the L6506?

Approx. Rs 550 / PieceGet Latest Price

The LT1074CT is a robust 5A step-down (buck) switching regulator developed by Linear Technology, now part of Analog Devices. This monolithic bipolar regulator integrates a power switch, oscillator, and control circuitry, requiring minimal external components for operation.

• Output Current: 5A

• Input Voltage Range: 8V to 60V

• Output Voltage Range: 2.5V to 50V (adjustable)

• Switching Frequency: Fixed at 100kHz

• Quiescent Current: Typically 8.5mA

• Shutdown Mode: Micropower shutdown reduces supply current to 200µA

• Protection Features:

  • Cycle-by-cycle current limiting

  • Overvoltage protection

  • Thermal shutdown

• Package: TO-220-5 (through-hole)

• Package: TO-220-5 (5-lead)

• Pin Configuration:

  1. Compensation (VC)

  2. Timing Capacitor (CT)

  3. Ground (GND)

  4. Output (Switch Output)

  5. Input Voltage (Vin)

For detailed specifications, application circuits, and thermal characteristics, you can refer to the official datasheet:

If the LT1074CT is unavailable or if you're seeking modern equivalents, consider the following alternatives:

• Analog Devices LT1076: A 2A version of the LT1074 with similar features.Texas Instruments LM2675: A simple switcher step-down voltage regulator with a 1A output current.

• Texas Instruments LM3478: A versatile controller suitable for boost, flyback, SEPIC, and inverting topologies.

When selecting an alternative, ensure that the replacement meets the voltage, current, and protection requirements of your specific application.

If you need assistance with application circuits, thermal management considerations, or selecting a suitable replacement, feel free to ask!

Approx. Rs 700 / PieceGet Latest Price

Here’s a detailed summary of the BSP742R from Infineon—a high-side smart power switch in an SO-8 package:

The BSP742R is part of Infineon’s Classic PROFET™ family—a monolithically integrated high-side switch with an N-channel vertical power MOSFET, charge-pump gate, and embedded protection and diagnostics . It's designed for automotive and industrial load-switching applications.

• Overload and short-circuit protection

• Integrated thermal shutdown with auto-restart

• Current limitation

• Diagnostic feedback on switch state 

These built-in functions make it ideal for reliably switching resistive, inductive, or capacitive loads in automotive/industrial systems.

• Full datasheet (17 pages) including electrical specs, brief application circuit, SO-8 package drawing: “Smart Power High‑Side‑Switch” version 1.3 Mouser product listing with pricing (~USD 1.67) and stock indications

• Infineon’s LTspice simulation model is available for download 

• What it is: 400 mA, 5–34 V high-side smart switch

• Where it shines: Automotive/industrial systems needing protected load control

• Why choose it: Compact SO‑8 package, integrated protections, diagnostic feedback, and robust RDS(on)

Would you like the schematic of a typical application, help choosing alternatives or replacement parts, or direct download links to the datasheet and SPICE model?

Approx. Rs 350 / PieceGet Latest Price

The UCC23513 is an isolated gate driver IC from Texas Instruments, offering high voltage isolation and robust drive capability. Here's a detailed overview:

• Isolation:
  – 5.7 kV RMS reinforced barrier (1 minute) and up to 8 kVPK transient per DIN V VDE V0884‑11 and UL 1577 
  – Designed for applications demanding strong isolation such as motor drives and industrial inverters.

• Drive Capability:
  – 4.5 A source / 5.3 A sink peak output current
  – 14 V to 33 V output supply (VCC) with optional undervoltage lockout (8 V or 12 V) 

• Input Stage:
  – “e‑diode” (emulated diode) input stage compatible with optocoupler-style drive (5–16 mA input current) 

• Timings & Immunity:
  – Propagation delay ≤ 105 ns
  – Part‑to‑part matching ≤ 25 ns
  – Pulse‑width distortion ≤ 35 ns
  – Common‑mode transient immunity > 150 kV/µs 

• Thermal & Package:
  – Operating junction up to +150 °C
  – Stretched SO‑6 package with > 8.5 mm creepage/clearance 

• Certifications:
  – UL 1577, VDE 0884‑11 reinforced isolation
  – CQC (China Quality Certification)
  – Q1 variant is AEC‑Q100 automotive qualified 

• Motor drives

• Industrial power supplies and UPS

• Solar inverters

• Induction heating systems

• Automotive power electronics (Q1 variant) 

• Datasheet (Rev. E, July 2020): full specifications, block diagrams, timing charts 

• Evaluation Module: UCC23513EVM‑014 available for design testing 

• Parametric filters and purchasing info are accessible via TI, Mouser, and DigiKey 

• High Isolation Strength: Reinforced 5.7 kV RMS barrier is suitable for high-voltage systems.

• Reliable Input Drive: Emulated diode input replaces opto‑LEDs to boost longevity and performance.

• Fast, Matched Switching: Tight delays and minimal distortion benefit synchronized multi-FET gate drives.

• Robust Design: High CMTI and thermal range up to 150 °C.

• Automotive-Ready: Q1 version supports automotive standards.

If you're designing isolated gate-drive front-ends—especially in motor control, power conversion, or automotive sectors—the UCC23513 is a powerful choice. Want me to help compare with similar parts (e.g., UCC23313 or UCC23525)? Or dive into wiring examples and evaluation board usage? Just let me know!

Approx. Rs 100 / PieceGet Latest Price

Here's an overview of the FL4105 MOSFET by IR (International Rectifier):

• Low RDS(on) for efficient switching

• Fast switching speed

• Avalanche energy rated

• Suitable for high-speed power switching applications

• DC-DC converters

• Motor control

• Power supplies (SMPS)

• General-purpose switching

Let me know if you’d like the original datasheet or pinout diagram.

Approx. Rs 125 / PieceGet Latest Price

Here’s a detailed overview of the STD10PF06 P‑Channel MOSFET from STMicroelectronics:

• Low RDS(on) (~0.18 Ω) for efficient operation.

• Fully Avalanche-tested and high dv/dt tolerance.

• Compact IPAK/DPAK packaging suitable for both through-hole and surface-mount.

• Designed for motor drives, DC-DC / DC-AC converters, and general high-current switching .

• Load switching in power rails

• Synchronous buck converters

• Motor control circuits needing high-side switching

• Official ST PDF with full specs: available around 9 pages .

• Obsolescence note: this part is marked as obsolete, but still relevant for redesigns or replacement searches .

Approx. Rs 250 / PieceGet Latest Price

Here’s the detailed technical overview of the NEC 2SK1271 (often simply labeled K1271), an N‑channel power MOSFET:

The 2SK1271 (K1271) is a high-voltage N-channel power MOSFET originally manufactured by NEC (later Renesas). It was designed for fast, high-voltage switching in industrial and power-supply applications 

• Drain‑Source Voltage (VₙDSS): 1400 V

• Gate‑Source Voltage (VₙGSS): ±20 V 

• Continuous Drain Current (IₙD): ±5 A (pulse up to ±10 A) 

• Total Power Dissipation (TₙC = 25 °C): 240 W 

• On‑Resistance (RₙDS(on)): max ~4.0 Ω at VₙGS = 10 V, IₙD = 3 A 

• Input Capacitance (Cₙiss): ~1800 pF typical, Output Capacitance around 500 pF

• Rise Time: ~30 ns

• Junction Temperature (TₙJ): –55 °C to +150 °C 
  
  Package: TO‑3P (sometimes listed as TO‑3P‑3) metal-can package 

This MOSFET was tailored for high-voltage switching environments such as industrial motor controllers, inverters, choppers, and power conversion stages. With its 1400 V and 5 A rating plus robust thermal dissipation, it was suited to demanding circuits .

At present, availability is limited—some small-volume stocklots appear online at ~$4 USD per piece, mostly in the TO‑3P package, though it’s largely obsolete in mainstream channels 

Given the high RₙDS(on) (~4 Ω) and large gate capacitance, this device is optimized for high-voltage, low-frequency switching rather than fast switching or conduction-heavy roles.

If you need a replacement or equivalent, look for modern MOSFETs with similar ratings—1400 V, 5–10 A, and packaged in TO‑247 or similar robust formats, offered by manufacturers like STMicro, Infineon, Mitsubishi, or ON Semiconductor.

If you share your application details (e.g. switching frequency, load current, voltage environment), I can help pinpoint current-generation alternatives.

• Full datasheet (9 pages) for detailed mechanical, thermal, and characteristic curves: available from AllDatasheet and NEC archives 

• Online cross-reference tools list possible substitutes and equivalent specs 

Interested in pinouts, wiring diagrams, or help sourcing a modern drop‑in replacement? Just let me know!

Approx. Rs 3,000 / PieceGet Latest Price

Here’s a refined overview of the Infineon FP25R12W2T4 IGBT Module based on the latest available information:

• Module Type: EasyPIM™ 2B, PIM configuration (three-phase inverter modular concept).

• Collector–Emitter Voltage (VCEO): 1200 V .

• Continuous Collector Current (IC nominal): 25 A .

• Collector–Emitter Saturation Voltage (VCE(sat)): ~1.85 V at 25 °C .

• Power Dissipation (Pd): 175 W .

• Junction/Operating Temperature: Up to 150 °C .

• IGBT Technology: Trench/Field‑stop (IGBT4) with emitter‑controlled 4‑diode and integrated NTC temperature sensor .

• Design Highlights: Low stray inductance, compact module design, high power density .

• Termination / Mounting Options:

  • Press‑Fit termination available .

  • Also available in screw-mount style; module dimensions: length ~56.7 mm, width ~62.8 mm, height ~12 mm .

• Thermal Resistance (case-to-heatsink): Approximately 0.75–0.85 K/W per IGBT .

This module is well-suited for motor drives, inverters, power supplies, and industrial power electronics. It offers:

• Rapid switching with low saturation voltage,

• Thermal stability via integrated NTC sensor,

• Compact, low-inductance design suited for high-density applications 

The Infineon FP25R12W2T4 is a robust EasyPIM™ 2B IGBT module delivering 1200 V, 25 A, 175 W power, built on Trench/Field‑stop technology (IGBT4), with optimized thermal design and mounting flexibility.

Let me know if you'd like details on PCB footprint, gate-driver recommendations, or compatible replacements for this module!

Approx. Rs 250 / PieceGet Latest Price

Here’s an image of the NSI6801 (e.g., NSI6801TCD/D) isolated gate driver from Novosense in its package, giving you a visual sense of its form—typically offered in SOIC-6 wide-body (SOW6) or DUB-8 layouts.

The NSI6801TCD belongs to Novosense’s family of high-performance isolated gate drivers, designed as direct replacements for optocoupler-based drivers.

• Single-channel isolated gate driver, pin-compatible with popular opto-coupler gate drivers 

• Peak source and sink current: ±5 A, enabling strong drive capability for switching transistors 

• High common-mode transient immunity (CMTI): up to ±150 kV/µs, ensuring robustness against fast transients 

• Supply voltage: Up to 32 V (some variants support up to 35 V with integrated UVLO) 

• Propagation delay: ~75–80 ns typical, with low pulse-width distortion (~30–35 ns)

• Operating temperature: –40 °C to +125 °C, apt for demanding industrial environments 

• Package options: SOW6 (SOIC-6 wide body) and DUB-8; offering up to ~5.7 kVrms isolation (UL1577) 

• Insulation and safety certifications: UL1577, DIN VDE V 0884-11, CSA, CQC—making it widely accepted in international markets 

The NSI6801 family is ideal for replacing opto-coupled gate drivers in applications requiring:

• PV inverters and high-voltage power supplies

• Motor drives, frequency converters

• DC/AC inverters, battery chargers, and UPS systems

• Use cases demanding high reliability, high power density, fast switching, and strong electrical isolation 

Advantages of NSI6801 over traditional optocoupler-based solutions include:

• Better reliability and reduced signal degradation over time

• Higher maximum operating temperature

• Lower propagation delays and reduced timing distortion

• Enhanced resistance to transient interference (high CMTI) 

If you're looking to drive IGBTs, SiC MOSFETs, or power MOSFETs with isolated gate control and require strong performance and reliability, the NSI6801TCD is a robust choice. Available in standard footprints (SOIC-6 wide or DUB-8), it's a drop-in upgrade for many opto-coupler gate driver circuits.

Would you like details on typical application circuits, comparisons with similar products, or assistance sourcing suppliers? Just let me know!

Approx. Rs 374 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 300 / PieceGet Latest Price

The OPA340UA is an SMD (Surface-Mount Device) operational amplifier (op-amp) from Texas Instruments. It is part of the OPA3xx series of op-amps, which are designed for precision applications and low-power usage.

• Low Power Consumption: The OPA340 is designed to operate with low supply currents, making it ideal for battery-powered and portable applications.
• Single-Supply Operation: This op-amp can be used in both single-supply and dual-supply configurations, which adds flexibility for different circuit designs.
• Rail-to-Rail Input and Output: The OPA340 can operate with voltages very close to the supply rails, which is useful for low-voltage designs and maximizing the available dynamic range.
• Low Offset Voltage: This op-amp has a very low input offset voltage, making it ideal for precision signal conditioning and analog sensing applications.
• Wide Voltage Range: It supports a wide input voltage range, typically from 2.7V to 40V, making it versatile for various power supply configurations.
• Low Noise: The device offers low noise operation, which is important in applications where signal integrity is critical.

• Signal Conditioning: Used for amplifying low-level signals, such as from sensors or transducers, in measurement and data acquisition systems.
• Audio Applications: Often found in audio equipment for signal amplification or buffering due to its low noise and low distortion.
• Battery-Powered Devices: Due to its low power consumption, the OPA340 is used in portable or battery-operated equipment.
• Precision Analog Circuits: Ideal for use in systems where accurate, low-noise amplification is required, such as instrumentation or medical devices.

• The OPA340UA is typically available in the SOT-23-5 package, a compact surface-mount package, making it ideal for space-constrained applications.

If you need more detailed specifications or the datasheet for the OPA340UA, feel free to ask!

Approx. Rs 350 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK

Approx. Rs 90 / PieceGet Latest Price

Additional Information:

• Delivery Time: READY STOCK